Qstarz BT-Q815 Quick Installation Manual

BT-Q815

 Bluetooth GPS Receiver 

1 

BT-Q815 Quick Installation Guide 

Thank you for purchasing Qstarz BT-Q815 Mini Solar MTK Bluetooth GPS Receiver. Next Generation 

GPS with same sensitivity as SiRF III but even powerful by SOLAR add-on. 

Main features: 

z

Adopt MTK chipset with high sensitivity to -158dBm 

z

Up to 30hrs operating time for GPS navigation 

z

51-Channel performance for fast acquisition and reacquisition 

z

Fast Position Fix ,Cold start

z

Vehicle tracking & Location base services 

z

Compatible with all navigation software 

z

Dual Power Supply - Built in rechargeable Lithium ion battery & Solar power 

z

Compatible with Bluetooth Serial Port Profile (SPP) in 10m wirelessly 

A. Standard Package 

GPS Unit BT-Q815 (1) + Lithium-Ion Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick 

Installation Guide. 

(* Travel Charger plug type might be adjusted according to corresponding countries.)

1.                                        2.                                      3.                                        4.                                         

B. Appearance 

C. Charging your battery 

For the first time using the BT-Q815, please charge battery until it is fully charged. Take the power 

cable and connect it to the power jack and recharge through travel charger or car cigarette 

adaptor. This will begin to charge the battery. Charging time is 4 hours typically. 

- When the Power LED is blanking with Green, battery power is low status / under charging mode. 

- When the Power LED is On with Green, the battery is fully charged.