Qstarz BT-Q816 Quick Installation Manual

BT-Q816 Super 51-CH Performance Bluetooth GPS Receiver 

BT-Q816 Quick Installation Guide 

Thank you for purchasing Qstarz BT-Q816 51-Channel Bluetooth GPS Receiver. It provides 25 hours of 

navigation and supports Smart Power control for power saving. 

Main features: 

z 

Adopt MTK chipset with high sensitivity to -158dBm 

z 

Up to 25hrs operating time for GPS navigation 

z 

51-Channel Performance tracking for fast acquisition and reacquisition 

z 

Fast Position Fix ,Cold start 36s, Warn start 33s,Hot start 1s 

z 

Vehicle tracking & Location base services 

z 

Smart power control – Auto On-Off function 

z 

Compatible with Bluetooth Serial Port Profile (SPP) in 15m wirelessly 

A. Standard Package 

GPS Unit BT-Q816 (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Optional Travel Charger (4) + Warranty Card + 

Quick Installation Guide.   

NOTE: The Cigarette Adaptor can only be used to charge BT-Q816. Please don’t make use of it with devices other than BT-Q816. 

1.                                              2.                                      3.                                                  4. (Optional)

B. Appearance 

1.    Power jack (mini USB type)   

2.  Power switch  

3.    Battery status LED (Red/Green)   

4.    Bluetooth status LED (Blue)   

5.    GPS status LED (Orange)   

6.  Internal antenna  

C. Battery installation

C-1 Put Battery in place:  Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover. Insert battery in the 

unit (2) and put battery cover on to the cabinet (3), then push down and force it forward to fit firmly (4). 

                          1.                                                        2.                                                            3.                                                            4. 

C-2 Take Battery out:  Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover (2). Then take out the 

battery from the unit (3).   

                    1.                                                              2.                                                      3.                                                                       

D. Charging your battery 

1

For the first time using the BT-Q816, please charge battery until it is fully 

charged. Take the power cable and connect it to the power jack (mini USB 

type) and recharge through travel charger or car cigarette adaptor. This will 

begin to charge the battery. Charging time is 3 hours typically. 

- When the Power LED is Red, battery power is low status. Please recharge. 

- When the Power LED is Green, the battery is under charging mode. 

- When the Power LED is blinking, the battery is fully charged.

1

６

２

４

３

５