QTech ECS Series Installation And Operating Instructions Manual

Summary of ECS Series

  • Page 1

    Ecs series 129 cramer road, jewett, new york 12444 usa 800-831-4175 • 518-734-6514 • fax: 518-734-6497 email: info@qtechscales.Com • web site: www.Qtechscales.Com installation and operating instructions the perfect counting scale for any application copies of this manual are available in adobe acrob...

  • Page 2

    Remove the contents from the carton which includes the scale, platter, and the ac adaptor. Install the platter by inserting the pins on the underside into the holes on the top of the scale console. The beveled edge of the platter should face forward. The scale may be powered either with 4 ’c’ cell b...

  • Page 3: Paper Sampling:

    Sampling is the process of “teaching” your scale to calculate a unit weight or “weight per 1000” pieces. Once the scale knows the unit weight, it can quickly provide a count by dividing the weight on the scale by the unit weight. This is the most critical step in the entire counting process. The gol...

  • Page 4: Coin Sampling:

    3 counting: once the unit weight has been determined through the sampling process you may begin adding additional pieces to the scale. The count will be displayed incrementally in the display window. The count will continue to accumulate until the maximum weight capacity of the scale is reached. If ...

  • Page 5: Require Technical Support?

    4 suggestions: tips and troubleshooting if you should inadvertently press the wrong key and the scale will not respond, turn the scale off and back on again to clear the problem. Purchase a quality surge protector for your scale to avoid damage from electrical surges and spikes. Do not operate cell ...

  • Page 6

    Note: the ecs scale does not need to be calibrated for normal use. Calibration is required only for iso certification. Procedure: turn the scale on. Press the units key repeatedly until scale displays, “lbs.” turn the scale off and turn it upside down. You will see a small black switch in a hole on ...

  • Page 7: Qcs Series

    6 other counting solutions from qtech low-cost, with exceptionally high resolution for small parts counting, postal verification, and ink mixing capacities: 3 lbs. - x-res-3 12 lbs. - x-res-12 our most popular and versatile model for every counting application resolution: 1 part in 300,000 capacitie...

  • Page 8: Ustomer

    About qtech business products… qtech business products is dedicated to providing cost effective solutions to your counting, ink mixing, weighing, and shipping scale needs. Our goal is to provide quality products and exceptional service and support. At qtech you can always expect: 90 day money back g...