QTech NETQ-6000 Quick Installation Manual - Netq-6000

Summary of NETQ-6000

  • Page 1

    Netq-6000 quick installation manual bridge - repeater enterprise high power outdoor wireless access point netq-6000 pc laptop ipad.

  • Page 2: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 1 thank you for purchasing enterprise high gain wireless router. This manual will instruct you how to configure router, and enable you to use it in a perfect status. After you have installed the router, you will be able to enjoy the surfing feely. ...

  • Page 3: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 2 1. Connect pc to one of the lan ports 2. Connect router’s wan port to adsl modem. Please do this only after you have finished the router configuration, to avoid any installation issues. This is very important. Please do it accordingly 3. If you a...

  • Page 4: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 3 b, click “general ” ,select “obtain an ip address automatically” and “obtain dns server address automatically”, then click ok..

  • Page 5: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 4 1.3. Log in wireless router a. Connect the configured pc to one of the four lan ports of router. Do not connect router to any other devices. (this is to avoid any ip address chaos), and switch on the router b. Start pc’s internet explorer, and en...

  • Page 6: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 5 mode as bridge, then, click the apply as below: 1.4. Connect setting at new page select the router you want to bridge:.

  • Page 7: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 6 put the password, and lock the ap, then, click the apply.

  • Page 8: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 7 2.1. Wlan settings please choose any one broadband setting method of below 3 2.1.1. Adsl(pppoe)dial-up settings as example of china telecom adsl with below related details provided by telecom operator. User name:gzdsl38912111@163.Gd password×××××...

  • Page 9: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 8 3.1. Wireless settings here you can amend router ssid and make encryption pls write down the right ssid and security method in above picture( it is better to choose wpapsk with secutiry), click finish to share the network. A. If you want to share...

  • Page 10: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 9 remarks: if you computer with build in 802.11b/g/n wireless usb adapter, and can’t search the available network, pls contact with after-sale department of your computer seller. With wireless network connection: right-click network neiborhood and ...

  • Page 11: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 10 list of accessory: 1, wireless broadband router; 2, power adapter; 3, quick installation guide; 4, 1meter lan cable; 5, warranty card. Faq: 1、it can not enter router setting interface after typing router ip in browser.. Please check if the route...

  • Page 12: Netq-6000

    Netq-6000 quick installation manual bridge-repeater 11 corresponding cable interface light is light? If only sometimes lighting doesn’t mean the networking cable is connected.. Please run the ping in the command prompt to verify the network connection between your pc(s) and the router. Lan interface...