Qtx Derby9 Manual - page 4
Rear panel features
Key to rear panel diagram
1.
DMX Input - 3 pin male XLR interface for DMX connections
2.
DMX Output - 3 pin female XLR interface for DMX connections
3.
Mains power input IEC socket / AC 220-240V 50/60Hz
4.
LED function setting display - shows the various menus and the selected functions
5.
MENU button - used to select the different menu items
6.
UP button - used to move ‘up’ through the function menus
7.
DOWN button - used to move ‘down’ through the function menus
8.
ENTER button - used to confirm your menu selection
9.
Microphone - for sound-to-light for operation
Remote control functions:
ON/OFF - switches the unit On or Off
DMX ON/OFF - switches the DMX On or Off
STOP START - switches the motor On or Off
MUSIC 1 - sound show mode 1
MUSIC 2 - sound show mode 2
MUSIC 3 - sound show mode 3
FLASH - switches the strobe On or Off
A1 - red + blue + warm white colour group
A2 - orange + white + yellow colour group
A3 - green + purple + UV colour group
A4 - 9 colour jump change
A5 - 3 colour jump change
A6 - gradual change 1
A7 - gradual change 2
SPEED +/- - increases or decreases speed