Qtx KA-2USB User Manual

Summary of KA-2USB

  • Page 1

    Ka-2usb karaoke amplifier order ref: 103.103uk user manual 2 x 50w max power output integral usb/sd player ir remote control for usb/sd 2-band tone eq controls and master volume control 2 microphone inputs with echo effect 2 stereo line inputs via rca connectors version 1.0

  • Page 2: Package Contents:

    152.761uk user manual introduction: ka-2usb karaoke amplifier thank you for choosing the ka-2usb karaoke amplifier with usb/sd player. This versatile stereo amplifier has three selectable inputs (tuner, dvd, usb/sd) and two microphone inputs with individual volume controls and echo control. The mast...

  • Page 3: Front Panel

    Front panel rear panel connect with power supply – earth wire must be connected: use the supplied iec lead to connect to the main power supply as follows: live (l) - brown wire neutral (n) - blue wire earth ( ) - yellow/green wire 1. Usb/sd player transport controls 2. Input selector rotary switch 3...

  • Page 4

    Connection connect microphone(s) via the front 6.3mm jack inputs aand any line inputs to the rear rca inputs for dvd/cd or tuner. If the mixed signal is to be delivered on to further amplifiers or recording devices, connect to these from the line output rca connectors. Connect speakers to the rear s...

  • Page 5

    Remote control specifications power supply 240vac 50hz (iec) line inputs 2 x rca l+r line + internal usb/sd player input sensitivity : line 500mv internal audio player usb/sd player (compressed digital audio) microphone inputs (unbalanced) 2 x 6.3mm jack input sensitivity : mic 2mv speaker outputs ...

  • Page 6

    Troubleshooting no power led on control panel ensure iec lead is in good condition and connected properly ensure mains outlet voltage is correct and power switch is on check mains inlet fuse – replace with approved type if necessary power led is on but no output check input signals and condition of ...