QTX Light 151.567 User Manual - page 3
User Manual
151.567
3
Do not switch on immediately but wait until it reach to room temperature, like the device has
been exposed to drastic temperature fluctuation.
Do not shake the device and avoid brute force when installing or operating
Do not spread the smoke or bubble of effect machine directly to the device
Do not use the device during thunderstorms and please disconnect the power
Do not use solvents or aggressive detergent to clean the device. Use a soft and clean cloth.
Do not modification the device or the connected power cord without authorized.
Use appropriate safety-rope for safety.
Do not stare to the light
6
Connect with power supply - The ground wire must be connected
Use the plug to connect to the main power supply as following.
Line
Connection
International signal
Brown
Live
L
Blue
Neutral
N
Green/Yellow
Earth
E
7
Quick Trouble Shooting
6.1 if the unit not functional – Check if main power is on and the fuse is OK.
6.2 if the unit does not react to music – check the sensitivity control at rear of the device.
8
Replacing Fuse:
Disconnect from the main power supply first, then unscrew the fuse holder cover to reveal the fuse.
Replace the correct fuse rating as stated on lighting or user’s guide. Then replace the fuse holder cover.
9. Dip Switch Setting & Function
ON
OFF
FUNCTION
Nil
1,2,3,4,5,6,7,8,9,10,11,12 Sound Activated
9
1,2,3,4,5,6,7,8,10,11,12
Sound Activated (with auto off after 10 seconds of
no sound input)
9.10
1,2,3,4,5,6,7,8,11,12
Illusion color changing (7Patterns circulate) and
Auto Master Controlling
9,11
1,2,3,4,5,6,7,8,10,12
Strobe (1-20Hz/sec) + Color Changing Effect
(Speed Adjustable through 5,6,7,8 )
9,10,11
1,2,3,4,5,6,7,8,12
Fix Flash (12Hz/sec) + Rate Pattern Changing
Effect
9,12
1,2,3,4,5,6,7,8,10,11
Sound Activated + Flash + Pattern Changing Effect
9,10,12
1,2,3,4,5,6,7,8,11
Sound Activated ( with auto change after 3
seconds of no sound input)