- DL manuals
- QTX Light
- Lighting Equipment
- 152.740
- User Manual
QTX Light 152.740 User Manual
Summary of 152.740
Page 1
152.740 please read this instruction manual and all safety warnings before you begin to operate this laser. Keep this instruction manual for future reference..
Page 2: Warning Data
User manual 1 warning data lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is possible if lasers are used incorrectly. Pay close attention to each safety remark and warning statement in the user manual. Read all instructions carefully before operatin...
Page 3: Laser Safety Warnings
User manual 2 laser safety warnings caution caution caution caution caution caution avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light.. This laser product can potentially cause instant eye injury or blindness if laser light directly strik...
Page 4
User manual 3 laser safety and operating instructions stop and read all laser safety data laser light is different from any other light source with which you may be familiar. The light from this product can potentially cause eye injury if not set up and used properly. Laser light is thousands of tim...
Page 5
User manual 4 such as uncontrolled balconies, etc. Z do not point lasers at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser reflections can be hazardous. Z never point a laser at aircraft, this is a federal offense. Z never point un-terminated laser beams into the sky...
Page 6
User manual 5 laser exposure warning laser light avoid direct eye exposure further guidelines and safety programs for safe use of lasers can be found in the ansi z136.1 standard “for safe use of lasers”, available from “www.Laserinstitute.Org”. Many local governments, corporations, agencies, militar...
Page 7
User manual 6 general safety instructions every person involved with installation and maintenance of this device have to: z be qualified z follow the instructions of this manual this device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a saf...
Page 8
User manual 7 qualified employee. Z do not switch the fixture on and off in short intervals as this would reduce the laser diode life. Z for replacement, please use fuses of same type and rating only. Z if the device has been exposed to drastic temperature fluctuation, do not switch it on immediatel...
Page 9: Before Operation
User manual 8 before operation unpacking instructions caution! Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspecti...
Page 10
User manual 9 rigging the fixture z the installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. Z the installation must always be secured with a secondary safety attachment, e.G. An appropriate catch net. T...
Page 11
User manual 10 proper laser set up & usage this fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted using a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your light...
Page 12: Product Overview
User manual 11 product overview z this device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual. Z the manufacturer will no...
Page 13
User manual 12 rear panel no. Name description 1 power plug dc 5v/2a input 2 interlock switch to interlock laser diodes output 3 power switch switch on and off the power 4 laser effect rotate direction switch interchange laser effect rotating, clockwise or anticlockwise 5 laser effect rotating speed...
Page 14: Control & Function
User manual 13 control & function z regular breaks during operation are essential to maximize the life of this device as it is not designed for continual use. Z do not switch the unit on and off in short time intervals z always unplug the unit when it is not used for a longer time. Or before replaci...
Page 15: Trouble Shooting
User manual 14 trouble shooting following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: z the fixture does not work, no laser and the fan does not work. 1) check the connect power. 2) measure the mains voltage on the main connector. 3)...
Page 16: Specifications
User manual 15 specifications mains input: total power: laser power: laser classification: laser safety standard: condition temperature: led power: led wavelength: measurement: n weight: dc 5v / 2a 8w 30mw 532nm green cw 80mw 650nm red cw class 3b en60825-1 2007 10~40℃ 5w 455nm see diagram below 1.6...