QTX Light LS-TOPAZ Manual
Summary of LS-TOPAZ
Page 1
Version: 2.0 this manual contains important laser system safety and operation information. Read and understand all instructions prior to powering on laser unit the first time, to avoid laser eye injury and to avoid breaking the law. Keep this manual in a safe place for future reference..
Page 2: Warning Data
User manual 1 warning data lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is possible if lasers are used incorrectly. Pay close attention to each safety remark and warning statement in the user manual. Read all instructions carefully before operatin...
Page 3: Laser Safety Warnings
User manual 2 laser safety warnings caution avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light. Caution this laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes. Caution it is illega...
Page 4
User manual 3 laser safety and operating instructions stop and read all laser safety data laser light is different from any other light source with which you may be familiar. The light from this product can potentially cause eye injury if not set up and used properly. Laser light is thousands of tim...
Page 5
User manual 4 z do not point lasers at people or animals z never look into the laser aperture or laser beams z do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc. Z do not point lasers at highly reflective surfaces such as windows, mirrors a...
Page 6
User manual 5 laser safety label reproductions caution – class 3b laser radiation, when open, avoid exposure to beam laser radioation avoid exposure to beam class 3b laser product. The label indicates the laser beam output aperture. Laser exposure warning laser light avoid direct eye exposure furthe...
Page 7
User manual 6 laser emission data as measured under iec measurement conditions for classification. Laser compliance statement this laser product complies with en/iec 60825-1 ed 2, 2007-03, and us fda/cdrh flpps via the terms of laser notice no. 50 dated june 24, 2007. Laser classification class 3b g...
Page 8
User manual 7 general safety instructions every person involved with installation and maintenance of this device have to: z be qualified z follow the instructions of this manual this device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a saf...
Page 9
User manual 8 z the electric connection, repairs and servicing must be carried out by a qualified employee. Z do not switch the fixture on and off in short intervals as this would reduce the laser diode life. Z for replacement, please use fuses of same type and rating only. Z if the device has been ...
Page 10: Before Operation
User manual 9 before operation unpacking instructions caution! Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspecti...
Page 11
User manual 10 the unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration. Dmx-512 connection between fixtures the fixture is equipped with 3-pin xlr sockets for dmx input and o...
Page 12
User manual 11 building a serial dmx-chain z if you are using the standard dmx-controllers, you can connect the dmx-output of the controller directly with the dmx-input of the first fixture in the dmx-chain. If you wish to connect dmx-controllers with other xlr-outputs, you need to use adapter cable...
Page 13
User manual 12 proper laser set up & usage this fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted using a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your light...
Page 14
User manual 13 z the installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. Z the installation must always be secured with a secondary safety attachment, e.G. An appropriate catch net. This secondary safet...
Page 15: Product Overview
User manual 14 product overview z this device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual. Z the manufacturer will no...
Page 16
User manual 15 rear panel no. Name description 5 power switch switch on and off the fixture 6 main power input with iec socket and integrated fuse holder. 7 interlock used to connect the optional emergency stopper. When you push this switch the laser effect will be blank-out immediately. 8 key switc...
Page 17: Control & Function
User manual 16 important for your own safely and full laser safety regulation, we do strongly recommend you to take this optional switch! Control & function z regular breaks during operation are essential to maximize the life of this device as it is not designed for continual use. Z do not switch th...
Page 18
User manual 17 operation stand alone mode z press func to enter mode option. Z till to led panel shows afb. Z press up/down to select your favourite mode. The laser is working in standalone mode. Each time when you turn on your laser, you will have this confirmed laser show. Display description afb ...
Page 19
User manual 18 dmx mode z press func to enter mode option z till to led panel shows 001. Z press enter to confirm the setting. The laser is working in “dmx mode”. With help of up/down button, it could be easily change the dmx address of the laser. Master/slave mode z press func to enter mode option ...
Page 20
User manual 19 dmx protocol channel value function 1 mode 000-017 dmx mode 018-035 automatic fast (blue) 036-053 automatic slow (blue) 054-071 automatic fast (green) 072-089 automatic slow (green) 090-107 automatic fast (cyan) 108-127 automatic slow (cyan) 126-143 automatic fast (mixed) 144-161 auto...
Page 21
User manual 20 4 color changing speed 000-004 stop 005-255 slow --> fast ch 5 zooming 000-127 100% - 5% 128-169 zoom in macro 170-209 zoom out macro 210-255 zoom in and out macro ch 6 x axis moving 000-127 128 different fixed position on x 128-191 clockwise moving 128-255 anticlockwise moving ch 7 y...
Page 22
User manual 21 pattern list in channel 2 dmx patterns dmx patterns dmx patterns dmx patterns 000-007 064-071 128-135 190-197 008-015 072-079 136-143 198-205 016-023 080-087 144-151 206-213 024-031 088-095 152-159 214-221 032-039 096-103 160-167 222-229 040-047 104-111 168-175 230-237 048-055 112-119...
Page 23: Trouble Shooting
User manual 22 trouble shooting following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: z the fixture does not work, no laser and the fan does not work. 1) check the connect power and main fuse. 2) measure the mains voltage on the main...
Page 24: Specifications
User manual 23 z not responding to dmx controller 1) check the dmx address settings and dmx polarity 2) if you have intermittent dmx signal problems, check the pins on connectors of the fixture or the previous one. 3) try to use another dmx controller. 4) check to see if the dmx cables run near or r...