Par12 item ref: 154.033uk 3 x 4w rgbw led par light user manual version 1.0
154.033uk user manual caution: please read this manual carefully before operating damage caused by misuse is not covered by the warranty thank you for choosing the par12 as part of your light show. The par12 is a compact dmx fixture which has been designed to be easy to set up as a small light show ...
154.033uk user manual power connection the par12 is hard-wired to a split iec lead with a male and a female iec connector. Connect the supplied iec mains lead from the male iec to a suitable outlet and connect the female iec on to power further par12 fixtures or other equipment. Rear panel internal ...
154.033uk user manual dmx connection the par12 has a male xlr and female xlr on the rear panel (1, 4) for dmx512 control or connection to other par12 units for master/slave operation. Link in sequence from dmx out to dmx in connectors using good quality 3-pin xlr leads which are suitable for dmx. Dm...
154.033uk user manual dmx operation in order to access the dmx functions, the dmx start address will need to be set on the control panel (or from the remote control – see below). When the display shows “ ”, this means that the par12 is operated by channels 1-8 as detailed on the previous page. When ...
154.033uk user manual specifications power supply 100 - 240vac, 50/60hz (iec in & through) power consumption 15w leds 3 x 4w rgbw connections iec in/out, dmx in/out (xlr) operating temperature range -20 to +40°c dmx channels 8 beam angle 25° dimensions 120 x 115 x 110mm weight 408g disposal: the “cr...
