Qrpa portable pa units order ref: qr10pa (178.840) qr12pa (178.843) qr15pa (178.846) user manual version 1.0
152.761uk user manual.
152.761uk user manual introduction: qrpa portable pa units thank you for choosing the qr series portable pa unit. Please read this manual prior to use to avoid damage to the item. This versatile portable pa unit is packed with features in a compact, manageable enclosure and is suitable for a wide ar...
Warning: to prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock do not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel. Safety prior to connecting mains, ensure that the supply volt...
Controls: operation: connection your new qtx qr-series portable pa unit may arrive with you with the internal battery fully charged. Before connecting to the mains, switch the unit on and see if the power led lights. If not, you will need to charge the battery before using away from a mains supply (...
Power up turn the volume, echo and mic volume controls down (anti-clockwise) and turn the power switch on (the power led should light). Bass and treble controls should remain pointing vertically (12-o-clock position). Switch vcv (voice controlled volume) off. Your qr-series pa unit should now be rea...
External inputs in addition to the unit’s own vhf microphones, 6.3mm jack inputs are provided to connect external wired or wireless microphones, which are both governed by the mic volume control. If required, the music level can be automatically muted when speaking into a microphone by switching the...
In addition to the panel controls, an infra-red remote control is provided for the usb/sd player which adds some further functions to allow greater control over the media player. To operate, remove the clear plastic tab from the remote to activate the battery. Charging the battery when not in use bu...
Troubleshooting: no output and no leds lit check power switch is on check battery is not drained fully check mains lead is connected check mains or d.C. Fuse hasn’t blown power led lit but no vhf output check 9v batteries in wireless transmitters check wireless transmitters are switched on check vhf...
