Qtx QRC12A User Manual - page 2
Introduction:
Thank you for choosing the QRC series active speaker cabinet. Please read this manual prior to use.
The QR active speaker range has been designed to serve many varied applications, delivering clear, powerful
sound reinforcement wherever it is needed. Please note: your QRC active speaker cabinet may be supplied with
more than 1 IEC or Fig.8 mains lead. Be sure to use the correct lead, taking note of the outlet voltage and rating.
Warning:
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric
shock do not remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
•
Prior to connecting mains, ensure that the supply voltage is correct and the mains lead is in good condition.
•
Avoid ingress of water or particles into the enclosure.
•
If the mains fuse blows, refer the unit to qualified service personnel
Placement
•
Keep the unit out of direct sunlight and away from heat sources.
•
Keep the unit away from moisture or dusty environments.
Control Panel
1)
MIC/LINE – Input sensitivity switch with LED for Channel 1
2)
CH1 INPUT BAL – Combo XLR or 6.3mm input Channel 1
3)
GAIN – Gain control for channel 1 input
4)
BASS – Bass EQ control for Channel 1 input
5)
TREBLE – Treble EQ control for Channel 1 input
6)
ECHO – Echo effect level control for Channel 1
7)
OUTPUT BAL – Balanced XLR signal output CH1 +CH2
8)
MASTER VOLUME – Master output control
9)
POWER – Mains power switch and LED
10)
MAINS INLET – IEC inlet with integral fuse holder
11)
CH2 INPUT – Twin RCA line input (summed)
12)
GAIN – Gain control for channel 2 input
13)
BASS – Bass EQ control for Channel 2 input
14)
TREBLE – Treble EQ control for Channel 2 input