Quest portable pa units order ref: quest-12 (178.886uk) quest-15 (178.888uk) user manual version 1.0
Quest user manual caution: please read this manual carefully before operating damage caused by misuse is not covered by the warranty introduction thank you for choosing a quest portable pa unit. This versatile portable pa unit is packed with features in a compact, manageable enclosure and is suitabl...
Quest pa user manual rear panel powering up your new quest portable pa unit may arrive with you with the internal battery charged. Before connecting to the mains, turn down all volume controls and switch the unit on (25) and see if the power led lights. If not, you will need to charge the battery be...
Quest pa user manual when powered up, bass and treble controls (20, 19) should remain pointing vertically (i.E. 12-o-clock position). Turn up the master volume control (18) part way and switch talkover (24) off. Your quest unit should now be ready to operate. Vhf wireless microphones extend the 2 vh...
Quest pa user manual internal media player each quest portable pa unit has an internal media player for digital audio playback from usb/sd/mmc media, fm tuner or via bluetooth. Press ‘mode’ (9) to select the function you require – usb/sd, fm radio (89-107) or bluetooth. – use this mode for both usb ...
Quest pa user manual fm tuner in fm tuner mode, the station frequency (in mhz) will be displayed. For initial setup, press play to begin the auto-tuning process. The tuner will seek through all frequencies for strong signal reception (i.E. Radio stations) these will be stored into memory as , , , … ...
Quest pa user manual specifications model quest-12 quest-15 power supply 230vac, 50hz (iec) fuse t3a, 250v output power 100w 100w frequency response 50hz - 16khz 40hz - 16khz spl @ 1w/1m 96db 98db main driver 300mmØ (12“) 380mmØ (15“) impedance: main driver 4 ohms hf driver type 25mm (1”) titanium c...
Quest pa user manual troubleshooting no output and no leds lit check power switch is on check battery is not drained fully check mains lead is connected check mains or d.C. Fuse hasn’t blown power led lit but no vhf output check batteries in wireless transmitters check wireless transmitters are swit...
