Qtx SmartLight User Manual

Summary of SmartLight

  • Page 1

    Smartlight user manual page 12 technical specification: see individual item for full details for more information visit www.Avsl-qtx.Com disposal: please disposal of an unserviceable device according to the current statutory requirement errors and omissions excepted. Copyright© 2012. Avsl group ltd....

  • Page 2

    Smartlight user manual page 2 introduction: led smartlight single colour par can the qtx smartlight family of led par cans have been designed for a variety of applications, whether you’re a mobile dj, a band/singer, a bar/nightclub, theater company or production company then this range of par cans w...

  • Page 3

    Smartlight user manual page 10 master/slave: if you have more than one unit you wish to operate the same but do not have a dmx controller or foot controller then you can do so in the following simple way: connect a 3 pin dmx xlr cable from the dmx out socket on the master unit and plug in to the dmx...

  • Page 4

    Smartlight user manual page 4 caution! To prevent mortal electrical risk and long life operation: for your safety, please kindly pay attention to all of the warnings listed below: always plug in the power plug last and disconnect from the mains, when the device is not in use or before cleaning. Do n...

  • Page 5

    Smartlight user manual page 8 rear layout: 1. Dmx in 2. Dmx out 3. Sound sensitivity 4. Microphone 5. Iec power out 6. Iec power in (fuse f1a and f3a for sl-q12) smartlight user manual page 5 connect with power supply – the ground wire must be connected: use the iec plug to connect to the main power...

  • Page 6

    Smartlight user manual page 6 general maintenance to maintain optimum performance and minimise wear, fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month. Dust build-up red...