Windmill led moving head light effect item ref: 150.550uk user manual.
150.550uk user manual please read through this manual thoroughly before use, any damage caused by misuse of the product will not be covered by the warranty. Safety instructions • please keep this manual for future reference. • always make sure that you are connecting to the proper voltage, and that ...
150.550uk user manual installation read the safety information before installing the fixture. The fixture is designed for indoor use only and must be used in a dry location with adequate ventilation. Ensure that none of the fixture’s ventilation slots are blocked. Fasten the fixture to a secure stru...
150.550uk user manual connection with the mains connect the device to the mains with the enclosed iec power supply cable. Control and input panels operation the windmill can operate in three different modes. Auto, sound activation and dmx. This next section will detail the differences in the operati...
150.550uk user manual control menu map dmx protocol ch1 pan 0-255: 0-540° ch2 pan fine adjustment 0-255: pan ch3 tilt1 0-255: 0-360° ch4 tilt 1 fine adjustment 0-255: tilt ch5 tilt2 0-255: 0-360° ch6 tilt2 fine adjustment 0-255: tilt ch7 pan continuous rotation 0-55: no function 56-127: counterclock...
150.550uk user manual ch13 colour macros & effects 0-10: no function 11-20: red 21-30: green 31-40: red+green 41-50: blue 51-60: red+blue 61-70: green+blue 71-80: red+green+blue 81-123: single colour change with increasing speed 124-166: colour mixing with increasing speed 167-209: colour fade with ...
150.550uk user manual ch13 colour macros & effects(head 1) 0-10: no function 11-20: red 21-30: green 31-40: red+green 41-50: blue 51-60: red+blue 61-70: green+blue 71-80: red+green+blue 81-123: single colour change with increasing speed 124-166: 124-166: colour mixing with increasing speed 167-209: ...
150.550uk user manual fixture cleaning to clean the fixture: 1. Disconnect the fixture from power and allow it to cool for at least 10 minutes. 2. Vacuum or gently blow away dust and loose particles from the outside of the fixture with low-pressure compressed air. 3. Clean the surfaces by wiping gen...
