Qtxsound VH1 User Manual

Summary of VH1

  • Page 1

    Vhf wireless microphone system (vh1, vh2, vn1, vn2, vhn2, vl1) user manual features: sleek, ergonomic design auto-mute on signal drop wide frequency response.

  • Page 2

    Introduction: thank you for choosing the qtx sound vhf-series wireless system. This professional wireless set provides a high quality microphone with vhf radio system for freedom of movement without loss of audio quality. Please read this manual before using this equipment in order to avoid damage t...

  • Page 3

    Receiver rear panel receiver front panel operation for handheld transmitters, insert the supplied 9v batteries by carefully unscrewing the base to reveal the + and - terminals inside the microphone body, connect the battery (ensure + and - are the correct way round) and carefully screw the base back...

  • Page 4

    Specifications carrier type vhf 174.1 –201.4mhz frequency stability ±0.005% maximum deviation ±30khz audio frequency response 40hz – 20khz signal to noise ratio >85db audio dynamic range >80db t.H.D. ≤0.2% maximum range 50m operating temperature -10ºc to +50ºc receiver power supply 12vdc 300ma (main...

  • Page 5

    Troubleshooting “power” led does not light on receiver ensure power adapter is connected to mains and working properly ensure receiver is switched on “power” led is lit but no “signal” led ensure transmitter is switched on check that transmitter is not out of reception range check that transmitter b...