QUAD CONCOURSE CSUB Datasheet - page 2
CONCOURSE CSUB
STANDARD ACCESSORIES:
Color: White with color matched grill cloth
‘C’ Clamp: A ‘C’ clamp is included with the loudspeaker to
facilitate mounting on ceiling finishes.
Tile bridge: Two 2ft/600mm rails are included with the loud-
speaker for mounting on ceiling grids.
Back box: Included with loudspeaker
Mounting: Four swivel mounts which rotate away from the
loudspeaker and clamp to the ceiling finish
Transformer: 70/100 volt transformer included
OPTIONAL ACCESSORIES:
Mud ring: For gypsum ceiling installations prior to the loud-
speaker
Ceiling Plate: For secure installations prior to the ceiling fin-
ish. Also includes a termination box with conduit knockouts
ARCHITECTURAL & ENGINEERING SPECIFICATIONS:
The loudspeaker shall consist of a 10” long throw low frequency
driver with dual coils and internal low pass filter installed in a
ported plastic grill with a rear back box and ‘C’ clamp and termi-
nal strip connection.
The loudspeaker shall have selectable 4 and 16 ohm impedance,
as well as an integral transformer rated at 60-30-15-7.5 watt taps
@ 70volts and 60-30-15 watt taps @100volts
The loudspeaker shall have a color matched grill cloth to hide
the transducers and switches.
The loudspeaker shall have the following performance
specifications:
Power, 100watts continuous
Sensitivity, 80 dB (1 watt, 1 meter)
Usable frequency response from 28Hz to 500Hz (-10 dB);
349.003
4
9
.0
0
Õ
371
Õ
371
Õ
331
Õ
331
SIDE VIEW
SIDE VIEW
Õ
371
Õ
371
FRONT VIEW
FRONT VIEW
81.00
81.00
114.001
1
4
.0
0
371.00
371.00
331.00
331.00
296.00
296.00
REAR VIEW
REAR VIEW
Dimensions
Concourse CSub version 3 22/03/04 10:11 AM Page 2