QUAD R6 Instruction Booklet - page 4
232mm/9.13”
R6
Speaker Cutout
305 x 200mm
12” x 7.87”
3
3
2
m
m
/1
3
.0
7
”
284mm/11.18”
R8
4
4
4
m
m
/1
7
.4
8
”
Speaker Cutout
410 x 245mm
16.14” x 9.65”
PRODUCT FEATURES
The Concourse R6 and R8 are designed to be installed in a wall
cavity and are supplied with a unique latching bar for wall mount-
ing. Wiring is terminated to a pair of color-coded spring terminals
on the rear of the speaker bezel.
Both models include the following components inside each carton:
• Speaker assembly (2)
• Cover grille (2)
• Latching bars (4)
• Latching bar screws (12)
• Plastic paint cover (2)
• Cardboard cutout template (2)
Please ensure that you are familiar with all of the
parts and how they are assembled before starting
the installation.
INSTALLATION
NOTE: Installations in existing buildings require that you first
ensure that the location is suitable and that there are no obstacles
behind the wallboard material before cutting an opening. Use
extreme caution when cutting into walls to avoid severing electrical
wiring, heating ducts or water pipes.
Step 1
Carefully unpack the contents of the box and ensure that all parts
are accounted for before beginning the installation.
Step
Locate the cardboard mounting template and use it to mark the
hole size needed for the installation. Cut the mounting hole using
a suitable saw.