Summary of Vision AW-QDR-POV
Page 1
Quadrone instruction manual.
Page 2
Accessories list upper cover of casing lower cover of casing circuit board landing feet carbon fiber spindle lithium battery propellers bearing red and blue line motor black and white reverse motor tail light panel bearing green light red light 1.
Page 3
Standard accessories packing list upgradeable accessories (optional) charger x1 no part name instruction manual quadcopter charger li-po battery propellers remote control 3.7v 730 mah li-po battery x1 propellers x4 quantity 6 5 4 3 2 1 1 1 1 1 4 1 water shooter camera bubble shooter 5.8g fpv wifi fp...
Page 4
Notice warnings additional warnings and precautions 3 • all instructions, warranties and other collateral documents are subject to change at the sole discretion of our company. • read the entire instruction manual to become familiar with the features of the product before operating. Failure to opera...
Page 5
Introduction table of contents 4 • thank you for choosing quadrone! This is a four-axis aircraft that can fly outdoors, in order to make it easier to control the aircraft. Please carefully read this manual before operating your quadrone. Please keep this manual for future reference. • before your fi...
Page 6
Battery usage and warnings 5 caution: all instructions and warnings must be followed exactly. Mishandling of li-po batteries can result in fire, personal injury, and/or property damage. 1. By handling, charging, or using the included li-po battery you assume all risks associated with lithium batteri...
Page 7
Charging the battery first flight preparation 6 1. Make sure the battery is fully charged. 2. When turning on the remotes power switch, make sure the throttle stick is at the bottom in its lowest position. 3. Make sure to fly in an open area away from crowds, cars, trees, and other obstacles to avoi...
Page 8
Syncing the quad and the remote 7 step 1 place the quadcopter on a flat surface and place the li-po battery into the quadcopter. Plug the battery into the quad and the led lights will begin to flash. Step 2 turn the remote controller on. Push the throttle stick to its lowest position. The quad will ...
Page 9
Remote diagram 8 led light power switch antenna camera 360 degree flips direction control stick forwards and backwards trim sideways trim 100% flying speed 80% flying speed directional trim speed trim ascending/descending 60% flying speed y-axis calibration 40% flying speed x-axis calibration one ke...
Page 10
Flight controls 360° flips 9 if you are not familiar with the controls of your quadrone, please take a few minutes to review them before take off. Throttle up ascending/descending turning forward/backward sideways flying throttle down ascend descend throttle left throttle right nose turns left nose ...
Page 11
One key return headless mode headless mode x-axis y-axis calibration troubleshooting 10 hold the one key return button for 2 seconds. The quadcopter will beep and the tail light will flash. The quadcopter will now return to the remote controller. Hold the headless mode button for 2 seconds and you w...
Page 12
Circuit board tail lamp socket lamp socket lamp socket lamp socket lamp socket electric socket electric socket 11 quadcopter still wanders forward after trim adjustment during hover. Cannot fly the quadcopter fully. The quadcopter dramatically deviates during headless mode. 1. Surface during power u...
Page 13
Circuit board electric socket 12.
Page 14
Parts list quadcopter parameters 13 no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 quantity 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 part protective guard propeller upper body receiver board bearing battery cover battery electric machinery light lampshade lower body carbon fiber spindle tail light plate c...