Qualcast GT2826 Instruction Manual

Manual is about: 430W Grass Trimmer

Summary of GT2826

  • Page 1

    Instruction manual important - please read these instructions fully before starting assembly these instructions contain important information that will help you get the best from your mower, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the cu...

  • Page 2

    Contents 2 customer helpline 0845 077 8888 safety information .......................................................................................................................................... 3 warnings symbols ...................................................................................

  • Page 3

    Important - please read these instructions fully before starting assembly 3 customer helpline 0845 077 8888 the following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembly and operating the trimmer. Take extra care, bewa...

  • Page 4

    Important - please read these instructions fully before starting assembly 4 customer helpline 0845 077 8888 important! When using this equipment, the following safety precautions must be followed to avoid injuries and damage. • read all operating instructions carefully and comply with them. It is im...

  • Page 5

    Important - please read these instructions fully before starting assembly 5 customer helpline 0845 077 8888 • take care against injury from the line cutter on the grass guard for controlling the cutting line length. After adjusting or extending new cutter line, always return the trimmer to its norma...

  • Page 6

    Important - please read these instructions fully before starting assembly 6 customer helpline 0845 077 8888 work area • do not expose the appliance to rain. Do not use the appliance in damp or wet conditions. • only use the appliance in daylight or good artificial light. Personal protection • wear s...

  • Page 7

    Important - please read these instructions fully before starting assembly 7 customer helpline 0845 077 8888 • never use the appliance when any guard or housing element is damaged or not in place. • ensure that the appliance will operate properly and perform its intended function. • have any damaged ...

  • Page 8

    8 customer helpline 0845 077 8888 1 power cable 2 upper handle 3 cable strain relief hook 4 on / off switch 5 wing nut and screw 6 helper handle 7 locking sleeve 8 aluminium shaft 9 motor head 10 flower guard 11 cutting head with line spool 12 line cutter 13 protective cover in the box parts 1 1 2 3...

  • Page 9

    9 customer helpline 0845 077 8888 warning! Before assembly, make sure that the tool is switched off and unplugged. Push the aluminium shaft into the plastic housing assembly and tighten the locking sleeve. Mount the protective cover 13 by sliding it into position then use 3 screws to lock it into pl...

  • Page 10

    10 customer helpline 0845 077 8888 • pull the ends of the helper handle 6 apart and slide it over the handle seat 14 . • attach the helper handle 6 bolt and wing fastener 5 . Step 3 - assembling the additional handle assembly 4 14 5 6.

  • Page 11

    11 customer helpline 0845 077 8888 switching on and off operating instructions & tips • form a loop in the end of the extension cable, hook it through the cable strain relif hook 3 . • connect the trimmer to the mains socket. • ensure you have a firm footing and hold on to the trimmer with both hand...

  • Page 12

    12 customer helpline 0845 077 8888 adjusting the additional handle adjusting the cutting angle operating instructions & tips the additional handle can be set in different positions. Set the handle in such a manner that the cutting head is slightly tilting forwards when in the working position. • loo...

  • Page 13

    13 customer helpline 0845 077 8888 lengthening the cutting lines manner of operation operating instructions & tips cutting will be poor with short or worn out lines. Check whether the line spool still holds sufficient lines when the cutting performance declines. Always disconnect the plug from the m...

  • Page 14

    14 customer helpline 0845 077 8888 cutting grass vertical cut / lawn edge trimming operating instructions & tips cut the grass by swaying the trimmer sideways to the right and left. • cut tall grass by a series of levels from top to bottom. For edging, release the locking sleeve 7 in an clockwise di...

  • Page 15

    15 customer helpline 0845 077 8888 cleaning and maintenance cleaning exchanging the cutting device maintenance always disconnect the plug from the mains socket before working on the trimmer. Any work that is not described in these instructions must be carried out by a competent repair shop. Only use...

  • Page 16

    16 customer helpline 0845 077 8888 replacing the line spool maintenance • disconnect the plug from the mains socket. • turn over the trimmer so that the cutting head (11) is facing upwards. • simultaneously press the two retaining tabs on either side of the cover (11) and remove the cover (17). • re...

  • Page 17

    17 customer helpline 0845 077 8888 general troubleshooting troubleshooting if you feel that your trimmer is not working correctly, follow the instruction below. If this does not solve the problems, please contact a competent repair agent. Warning!Before proceeding, switch off and unplug. Check that ...