1. DL manuals
  2. Qualcast
  3. Lawn Mower
  4. M2E1232M
  5. Instruction manual

Qualcast M2E1232M Instruction manual

Manual is about: Qualcast 1200W Electric Rotary Mower

Summary of M2E1232M

  • Page 1

    Instruction manual important - please read these instructions fully before starting assembly these instructions contain important information that will help you get the best from your mower, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the cu...

  • Page 2

    Contents 2 customer helpline 08456 400 800 safety information .......................................................................................................................................... 3 warnings symbols ...................................................................................

  • Page 3

    Important - please read these instructions fully before starting assembly 3 customer helpline 08456 400 800 the following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembly and operating the mower. Take extra care, beware...

  • Page 4

    Important - please read these instructions fully before starting assembly 4 customer helpline 08456 400 800 cutting width important! When using equipment, the following safety precautions must be followed to avoid injuries and damage. • read all operating instructions carefully and comply with them....

  • Page 5

    Important - please read these instructions fully before starting assembly 5 customer helpline 08456 400 800 note! Only supply power to the equipment through circuit protected by an rcd with a maximum trip current of 30 ma. • use only plugs or connectors approved for outdoor usage. • extension cables...

  • Page 6

    Important - please read these instructions fully before starting assembly 6 customer helpline 08456 400 800 • never run the mower in enclosed or poorly ventilated rooms or if there are inflammable or explosive fluids, vapours or gases nearby. • switch off the motor and disconnect the mains lead befo...

  • Page 7

    Important - please read these instructions fully before starting assembly 7 customer helpline 08456 400 800 • if the lawn mower begins to vibrate abnormally, switch it off immediately, disconnect the plug immediately and check it carefully. Ensure that all the nuts, bolts and screws are tight and th...

  • Page 8

    Important - please read these instructions fully before starting assembly 8 customer helpline 08456 400 800 • disconnect from the mains supply (i.E. Remove the plug from the mains socket) whenever leaving the machine unattended, before cleaning a blockage, after striking a foreign object, whenever t...

  • Page 9

    9 customer helpline 08456 400 800 1 curved handle section 2 handle fastener (x2) 3 bottom handle bar (x2) 4 grass collector 5 wheels 6 housing and deck 7 grass chute deflector guard 8 cable clamp 9 switch box 10 safety lock-off button 11 cable strain-release hook 12 switch on/off lever 13 screws (x2...

  • Page 10

    10 customer helpline 08456 400 800 3 6 13 13 14 2 14 3 1 3 6 2 1 • insert the each lower bar 3 into the slot in the housing 6 • use the 2 screws 13 provided to lock each bar into position in the deck. • fix the top curved handle 1 section to the lower bars 3 . Use the bolts 14 and wing nut fasteners...

  • Page 11

    11 customer helpline 08456 400 800 step 2 - grass collector assembly assembly 5a 5c 5b 5d 15 16 17 4.

  • Page 12

    12 customer helpline 08456 400 800 5a. Clip the handle 15 into the top half of the grass box 16 5b. Align the front ends of the top half and the bottom half of the grass collector box. Clip the two halves together starting at the front. 5c. Once the front clips on either side are secure, work back o...

  • Page 13

    13 customer helpline 08456 400 800 7 hook the mains cable through the cable strain-release 11 to reduce the strain on the cable fitting as you mow. 11 extension lead (continued) assembly.

  • Page 14

    14 customer helpline 08456 400 800 step 3 - fitting / removing the grass collector assembly • lift the deflector guard 7 • place the grass collector 4 on the mounting bracket at the back of the lawn mower. Ensure the grass collector fits snugly against the mower deck. • lower the deflector guard 7 o...

  • Page 15

    15 customer helpline 08456 400 800 setting the cutting heights operating instructions & tips important!Set the cutting height only when the motor is switched off and the power cable has been disconnected. • turn the mower on its side. • pull the spring loaded axle forward or backward. • select a slo...

  • Page 16

    16 customer helpline 08456 400 800 on/off operation operating instructions & tips 10 10 12 • connect the mower to your power supply socket. • before switching on, ensure that the mower is not in contact with any foreign objects. • to switch on, press the safety lock-off button 10 on the handle, then...

  • Page 17

    17 customer helpline 08456 400 800 operation operating instructions & tips before you connect the equipment to the mains supply make sure that the data on the rating plate corresponds to your mains supply. Important!Always ensure the on/off switch is working correctly. Do not use if you suspect a fa...

  • Page 18

    18 customer helpline 08456 400 800 mowing advice operating instructions & tips we recommend that you mow in overlapping lines. Only mow with a sharp blade so that the blades of grass do not fray. This can cause grass to turn yellow. To achieve a good cut, guide the lawn mower in lines that are as st...

  • Page 19

    19 customer helpline 08456 400 800 cleaning & maintenance blade maintenance maintenance always disconnect the mains power plug before engaging in any cleaning work. Cleaning • keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a...

  • Page 20

    20 customer helpline 08456 400 800 blade maintenance (continued) carbon brushes maintenance and storage maintenance if the blade is blunt, it can be sharpened in a specialised workshop. If the blade is damaged or showing signs of imbalance, it must be replaced. Carry out the following steps to chang...

  • Page 21

    21 customer helpline 08456 400 800 general troubleshooting troubleshooting the following table provides solutions to common problems encountered with the mower. Fault possible cause solution mower does not start no power at mains socket check the fuse, switch, socket, cable, wire and have any repair...

  • Page 22

    22 customer helpline 08456 400 800 technical data table disposal and recycling getting help technical data disposal specification value voltage 220-240 v ~ 50 hz power input 1200w motor speed 3350min -1 cutting width 32cm cutting height adjustment 20, 40, 60 mm; 3 levels volume of grass collector 30...