1. DL manuals
  2. Qualcast
  3. Lawn Mower
  4. MEB1334M
  5. Instruction Manual

Qualcast MEB1334M Instruction Manual

Manual is about: 1400W electric rotary mower

Summary of MEB1334M

  • Page 1

    Instruction manual important - please read these instructions fully before starting assembly these instructions contain important information that will help you get the best from your mower, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the cu...

  • Page 2

    Contents 2 customer helpline 0345 077 8888 safety information .......................................................................................................................................... 3 warnings symbols ...................................................................................

  • Page 3

    Important - please read these instructions fully before starting assembly 3 customer helpline 0345 077 8888 the following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembly and operating the mower. Take extra care, beware...

  • Page 4

    Important - please read these instructions fully before starting assembly 4 customer helpline 0345 077 8888 wait until all moving parts have stopped completely before touching them. The blade may continue to rotate after the machine is switched off, a rotating blade can cause injury. Noise level spe...

  • Page 5: Intended Usage

    Important - please read these instructions fully before starting assembly customer helpline 0345 077 8888 5 intended usage this lawn mower if designed for use in private gardens. The machine is to be used for its prescribed purpose only. Any other use is deemed to be a case of misuse. The user / ope...

  • Page 6

    Important - please read these instructions fully before starting assembly 6 customer helpline 0345 077 8888 5 note! Only supply power to the equipment through circuit protected by an rcd with a maximum trip current of 30 ma. • use only plugs or connectors approved for outdoor usage. • extension cabl...

  • Page 7

    Important - please read these instructions fully before starting assembly customer helpline 0345 077 8888 7 machine safely. Children must always be supervised in order to ensure that they do not play with the machine. • always check the mower for signs of damage before each usage. • always disconnec...

  • Page 8

    Important - please read these instructions fully before starting assembly 8 customer helpline 0345 077 8888 • never run the mower in enclosed or poorly ventilated rooms or if there are inflammable or explosive fluids, vapours or gases nearby. • switch off the motor and disconnect the mains lead befo...

  • Page 9

    Important - please read these instructions fully before starting assembly 9 customer helpline 0345 077 8888 • make sure you keep your feet at a safe distance from the mower blade at all times! Do not stand near the grass ejection chute if the grass collector is not fitted. • the safety distance from...

  • Page 10

    Important - please read these instructions fully before starting assembly 10 customer helpline 0345 077 8888 • if the lawn mower begins to vibrate abnormally, switch it off immediately, disconnect the plug immediately and check it carefully. Ensure that all the nuts, bolts and screws are tight and t...

  • Page 11

    12 11 important - please read these instructions fully before starting assembly customer helpline 0345 077 8888 11 operating and maintenance safety safety information caution! Read all safety requirements and instructions. Any errors made in following the safety requirements and instruction may resu...

  • Page 12

    12 11 customer helpline 0345 077 8888 11 1 lock-off safety button 2 start / stop switch levers 3 cable strain-relief device 4 switch box housing 5 top, curved handle section 6 quick release levers (4 x lever, bolt & washer) 7 grass box top 8 grass collector 9 cutting height adjuster 10 bottom handle...

  • Page 13

    14 13 customer helpline 0345 077 8888 • the bottom handle support 10 is attached to the deck on either side using a bolt, washer and plastic quick release lever. If the handle is not pre-fitted in the box push the bolt (from the inside towards the outside) through the deck, handle, then washer, and ...

  • Page 14

    14 13 customer helpline 0345 077 8888 • the top, curved handle section 5 is assembled to the bottom handle supports 10 using a bolt, washer and quick release lever 6 on either side. Adjust the height to suite the operator as necessary by inserting the bolt into the required holes on the handle (2c)....

  • Page 15

    16 15 customer helpline 0345 077 8888 step 3 - grass collector assembly assembly 3a 11 7 3b 17 18 3c 17 16 19.

  • Page 16

    16 15 customer helpline 0345 077 8888 step 3 - grass collector assembly (continued) assembly 3a. Insert the collector handle 11 into the slots on the plastic top of the grass collector 7 . 3b. Clip the plastic retainers 17 two sides of the cloth grass collector onto the metal frame 16 fully insert t...

  • Page 17

    18 17 customer helpline 0345 077 8888 operating instructions & tips grass full indicator your mower may be fitted with a grass full indicator. This is a small red flap on the top side of the grass collector. When this flap remains open as you work, it means that the grass collector is not full (air ...

  • Page 18

    18 17 customer helpline 0345 077 8888 setting the cutting heights operating instructions & tips 6.

  • Page 19

    20 19 customer helpline 0345 077 8888 setting the cutting heights (continued) operating instructions & tips important!Ensure the power cord is disconnected from the mains supply before adjusting the cutting height. To adjust the cutting height, gently pull the height adjustment lever towards you to ...

  • Page 20

    20 19 customer helpline 0345 077 8888 1. Press on the lock-off safety button 1 to unlock the on/off lever 2 . 2. Then operate the on/off lever 2 to switch the mower on. On/off operation operating instructions & tips 7 1 2.

  • Page 21

    22 21 customer helpline 0345 077 8888 release the on/off lever to stop the motor always ensure the on/off switch is working correctly. Do not use if you suspect a fault. Ensure that the blade is not rotating and that the power supply is disconnected before examining the switch. Important!Never open ...

  • Page 22

    22 21 customer helpline 0345 077 8888 mowing advice operating instructions & tips we recommend that you mow in overlapping lines. Only mow with sharp blades so that the blades of grass do not fray. This can cause grass to turn yellow. To achieve a good cut, guide the lawn mower in lines that are as ...

  • Page 23

    24 23 customer helpline 0345 077 8888 cleaning & maintenance blade maintenance maintenance cleaning • keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a soft brush or blow it with compressed air at low pressure after usage. • ...

  • Page 24

    24 23 customer helpline 0345 077 8888 blade maintenance (continued) carbon brushes maintenance and storage maintenance if the blade is blunt, it can be sharpened in a specialised workshop. If the blade is damaged or showing signs of imbalance, it must be replaced. Important!Always switch the product...

  • Page 25

    26 25 customer helpline 0345 077 8888 general troubleshooting troubleshooting the following table provides solutions to common problems encountered with the mower. Fault possible cause solution mower does not start no power at mains socket check the fuse, switch, socket, cable, wire and have any rep...

  • Page 26

    26 25 customer helpline 0345 077 8888 technical data table disposal and recycling getting help technical data disposal specification value voltage 220-240 v ~ 50 hz power input 1400w motor speed 3500min -1 cutting width 34cm cutting height adjustment 20, 30, 40, 50, 60, 70mm; 6 levels volume of gras...