1. DL manuals
  2. Qualcut
  3. Chainsaw
  4. CS4600 Garden Master Series
  5. Operating Instructions Manual

Qualcut CS4600 Garden Master Series Operating Instructions Manual

Manual is about: 46cc

Summary of CS4600 Garden Master Series

  • Page 1

    Power products llc. Garden master series cs4600 chainsaw operating instructions 46cc cs4600

  • Page 2: Cs4600

    Power products llc. Cs4600 contents description of symbols......................................................................................1 machine specifications .....................................................................................1 unpacking......................................

  • Page 3: Cs4600

    Power products llc. Cs4600 unpacking due to modern mass production techniques, it is unlikely that your qualcut chainsaw is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could...

  • Page 4: Cs4600

    ! Power products llc. Cs4600 save these instructions. 1) work area a) keep work area clean and well lit. Cluttered and dark areas invite accidents. B) do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which ma...

  • Page 5: Cs4600

    Power products llc. Cs4600 additional safety rules for petrol chain saws note: for safety reasons the chain saw is shipped with the chain brake fully engaged. This brake must be released before the saw becomes operational. • never cut into the ground. • never cut into wire fences. • never cut into s...

  • Page 6: Cs4600

    ! Power products llc. Cs4600 • do not let go whilst the motor is running. • make sure that the area of operation is free of obstructions. • use high speeds when cutting. • do not let the point of the guide bar contact a log, branch or any other object. • do not over-reach or cut above shoulder heigh...

  • Page 7: Cs4600

    Power products llc. Cs4600 operational safety this chainsaw has been especially designed for tree maintenance and should therefore only be used by trained operators when working on trees. 1. Never operate a chain saw when you are fatigued, ill, or upset, or under the influence of medication that may...

  • Page 8: Cs4600

    ! Power products llc. Cs4600 effects of vibration if you continue to use high-vibration tools these symptoms will probably get worse, for example: • the numbness in your hands could become permanent and you won’t be able to feel things at all; • you will have difficulty picking up small objects such...

  • Page 9: Cs4600

    Power products llc. Cs4600 1. Saw chain 2. Guide bar 3. Spark arrester screen 4. Chain brake lever 5. Front handle 6. Starter handle 7. Stop switch 8. Safety trigger 9. Rear handle 10. Oil tank cap 11. Fuel tank cap 12. Starter cover cs4600 chainsaw parts diagram 1 2 21 13 15 4 5 16 14 22 17 20 18 1...

  • Page 10: Cs4600

    ! ! Power products llc. Cs4600 tools for assembly you will need these tools to assemble your chain saw: 1. Combination wrench-screwdriver (contained in your user’s kit). 2. Heavy duty work gloves (user supplied). Assembly requirements warning! Do not start saw engine until unit is properly prepared....

  • Page 11: Cs4600

    Power products llc. Cs4600 adjusting saw chain this diagram shows information concerning correct cold tension (a), correct warm tension (b) and as a guide for when chainsaw needs adjustment (c). A b c chain brake mechanical test ! Warning: the purpose of the chain brake is to reduce the possibility ...

  • Page 12: Cs4600

    ! ! Power products llc. Cs4600 to test chain brake fuel 5l fuel = 125ml 2 stroke oil = 40:1 ratio use regular grade unleaded gasoline mixed with 40:1 custom 2 cycle engine oil for best results. Some conventional gasolines are being blended with oxygenates such as alcohol or an ether compound to meet...

  • Page 13: Cs4600

    ! Power products llc. Cs4600 engine pre-start checks operation warning: never start or operate the saw unless the bar and chain are properly installed. Starting the engine 11..

  • Page 14: Cs4600

    Power products llc. Cs4600 re-starting a warm engine chain brake operational test stopping engine 12..

  • Page 15: Cs4600

    Power products llc. Cs4600 ! ! Saw chain / bar lubrication automatic oiler ! 13..

  • Page 16: Cs4600

    Power products llc. Cs4600 felling felling a tree warning: a retreat path (a) should be planned and cleared as necessary before cuts are started. The retreat path should extend back and diagonally to the rear of the expected line in the fall. ! Warning: do not cut down a tree during high or changing...

  • Page 17: Cs4600

    Power products llc. Cs4600 felling cut warning: as the felling cut gets close to the hinge, the tree should begin to fall. Whe tree begins to fall, remove saw from cut, stop engine, put chainsaw down and leave area along retreat path. ! Limbing warning: never cut tree limbs while standing on tree tr...

  • Page 18: Cs4600

    Power products llc. Cs4600 bucking using a sawhorse 16..

  • Page 19: Cs4600

    Power products llc. Cs4600 maintenance preventative maintenance air filter cleaning air filter: warning: never operate saw without the air filter. Dust and dirt will be drawn into engine and will damage it. Keep the air filter clean! ! 17..

  • Page 20: Cs4600

    Power products llc. Cs4600 warning: never perform maintenance when the engine is hot, to avoid any chance of burning hands or fingers. ! Fuel filter replacing fuel filter: warning: never operate saw without a fuel filter. The fuel filter should be replaced after each 20 hours of use. Drain tank comp...

  • Page 21: Cs4600

    Power products llc. Cs4600 spark plug replacing spark plug: carburetor sprocket tip 19. Ngk ld l8rtf torch bm6a champion cj8.

  • Page 22: Cs4600

    Power products llc. Cs4600 chain maintenance warning: wear heavy duty work gloves when handling the bar and chain. ! Warning: never have more than 3 links removed from a loop of chain. This could cause damage to the sprocket. ! 20..

  • Page 23: Cs4600

    Power products llc. Cs4600 guide bar warning: never mount a new chain on a worn sprocket or self-aligning ring. ! 21..

  • Page 24: Cs4600

    Power products llc. Cs4600 chain sharpening warning: when having wrong sharpened chain, there may occur a higher danger of kickback. ! Warning: all cutting teeth must be similarly long. Different lengths of teeth can cause rough run of the chain or it’s rupture as well. ! Warning: after sharpening c...

  • Page 25: Cs4600

    Power products llc. Cs4600 warning: a sharp chain produces well defined chips. When your chain starts to produce sawdust it’s time to sharpen. ! Warning: proper adjustment of the depth gauge is as important as proper sharpening of the chain. ! Storing a chainsaw 23..

  • Page 26: Cs4600

    Power products llc. Cs4600 troubleshooting 24..

  • Page 27: Cs4600

    5. What is not covered under this warranty: a. Implied warranties, including those of merchantability and fitness for a particular purpose are limited in duration to this express warranty. After this period, all risks of loss, from whatever reason, shall be on the purchaser. B. Any incidental, indir...

  • Page 28: Cs4600

    Congratulations on your new qualcut product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This product is backed by our extensive warranty and world-wide service network. Euroquip, 109 bolt road, stoke, nelson, new zea...