- DL manuals
- Qualcut
- Power Tool
- RA0038LS
- Operating Instructions Manual
Qualcut RA0038LS Operating Instructions Manual
Summary of RA0038LS
Page 1
Power products llc. Garden master series operating instructions ra0038ls.
Page 2
Contents power products llc. Description of symbols.................................................3 specifications.............................................................3 unpacking......................................................3 carton contents ...........................................
Page 3: Ra0038Ls
3. The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Conforms to relevant safety standards wear hearing protection. Wear eye protection. Wear head protection. Read these instructions for use carefully. Failure to follo...
Page 4
4. Carton contents the qualcut 4 in 1 multi-tool is supplied with the following accessories as standard. 1. 38cc engine and extension shaft assembly 2. Line trimmer / brush cutter attachment 3. Pruning saw attachment 4. Hedge trimmer attachment 5. Pruning saw bar 6. Pruning saw chain 7. Main shaft h...
Page 5: Ra0038Ls
Save these instructions. 1) work area a) clear the area to be cut before each use. Remove all objects such as rocks, broken glass, nails, wire, string etc. That can be thrown or become entangles in the cutting attachment. B) do not operate power tools in explosive atmospheres, such as in the presenc...
Page 6
3) power tool use and care a) check condition of multi-tool before use. The multi-tool should be assembled as per manufacturer's instructions. Do not attach any blade to a product without proper installation of all required parts. Failure to use the proper parts can cause the blade to fly off and se...
Page 7: Ra0038Ls
! ! To reduce the risks of rsi/ cts do the following: • avoid using your wrist in a bent, extended or twisted position. Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger. • take periodic breaks to minimize repetition and ...
Page 8
Power products llc. 8. To reduce the risk of loss of control: • replace or re-sharpen dull blades. Dull blades are more likely to bind in the cut and cause blade thrust. • watch out for hidden obstacles, such as rocks, stumps, roots, etc., that could cause the blade to kick back if struck. Blade thr...
Page 9: Ra0038Ls
Ra0038ls 9. 2. To release the blade, use screwdriver to hold flange and release nut, the blade than then be removed. ! Warning! Please make sure the cutting head has been assembled correctly before use. Pruning saw attachment assembly 1. Remove the chain cover from the pruning saw attachment head 2....
Page 10
Power products llc. 10. Starting checklist important: do not start the unit until it has been completely assembled. Before switching on the unit, always check the oil. Check machine before use check the safety condition of the device: 1. Check the machine for leaks. 2. Check the machine for visual d...
Page 11: Ra0038Ls
Ra0038ls 11. ! Warning! Incorrect sparkplug installation can result in serious engine damage. ! Warning! Do not cut with a dull, cracked or damaged metal blade. Before cutting growth, inspect for obstructions such as rocks, metal stakes or strands of wire from fences. If an obstruction cannot be rem...
Page 12
Power products llc. 12. ! Warning! When replacing parts other than engine or emissions parts, use only qualcut replacement parts. Use of any other parts may create a hazard or cause product damage. Service procedure fuel tank assembly (includes fuel lines, fuel cap and fuel filter): inspect before e...
Page 13: Ra0038Ls
Ra0038ls 13. ! Warning! Read and understand these operating instructions, as well as the information supplied with your machine, and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders. Fig 1. Fig 2. Leave approx. 3 inches ther...
Page 14
14. Power products llc. Fig 6. Mark for usable limit on cover. Slit on eyelet part. Fig 7. Important! The latches fully spread in the windows. (shaded area) • ensure chain is kept well sharpened and replaced when worn. • replace guide bar and chain drive sprocket when worn. • use only designated, fr...
Page 15: Ra0038Ls
Ra0038ls 15. Troubleshooting.
Page 16
16. S0043-a14 engine air filter element s0043-a3 upper (engine end) drive shaft - 763mm s0043-a3-2 shaft connector assembly s0043-a37 recoil starter engagement cup s0043-a39 recoil starter assembly s0043-a67 engine fuel cap (suits ra0043ls, ra330st) s0043-b3 shaft assembles complete s0043-b3-6 lower...
Page 17: Warranty
17. B. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure or malfunction of this product. C. This warranty does not apply to any accessory or consumable items included with the product which are subject to wear from usage; the repair or repla...
Page 18
18. Power products llc..
Page 19: Ra0038Ls
19. Ra0038ls.
Page 20
Euroquip nz: 0800 387 678, euroquip australia: 1-800-040947 service@euroquip.Co.Nz congratulations on your new qualcut product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This product is backed by our extensive warra...