Qualitel Milano User Manual - page 4
3
INSTALLATION
1. Plug one end of the line cord into the connector marked “line” on the base of the telephone
and the other end into the wall socket.
2. Connect the handset to the base of the telephone with the curly cord.
3. Select your preferred ringer volume (High or Low).
4. Set the dial mode to PULSE or TONE diallingaccording to yourlocal network.
WALL MOUNT INSTALLATION
1. Mark two points on the wall that are 72mm apart to drill the fixing centers as shown below,
check carefully that there are no pipes or electrical wires hidden in the wall where you are to
drill the holes.
2. Fix two screws (not supplied) at the marked locations, leaving approximately 7mm between
the wall and the screw head.
3. Hang the base unit on the screws using the wall mount slots.
4. You may need to remove the telephone from the wall and tighten the screws so that the base
is securely fixed and does not wobble. Place the handset on the cradle with the parking hook
on the cradle arranged to fit in the parking recess under the earpiece on the handset.
RECEIVING A CALL
¾ From handset
1. When the telephone rings, pick up the handset and talk to the other party.