1. DL manuals
  2. Quality Cable & Electronics
  3. Receiver
  4. Indoor Fiber Optic Receiver
  5. User Manual

Quality Cable & Electronics Indoor Fiber Optic Receiver User Manual

Summary of Indoor Fiber Optic Receiver

  • Page 1

    Quality cable & electronics, inc. Indoor fiber optic receiver user ’s manual caution these servicing instructions are for the use of qualified personnel only. To reduce the risk of electrical shock, please do not perform any serving excluding the instruction in the installation manual unless you are...

  • Page 2

    2 indoor fiber optic receiver before you begin using this product, please familiarize yourself with this user ’s manual. If you need assistance, please contact us. Please do not open the unit and verify any circuit by yourself, and it is recommended to make some simple checks before calling service....

  • Page 3

    3 indoor fiber optic receiver introduction the indoor fiber optic receiver is a stand alone am optical receiver which may be mounted in a 19" rack. Located at either a headend or a remote site, the unit is a versatile, cost effective alternative to devices with bulkier environmentally sealed and rug...

  • Page 4

    4 indoor fiber optic receiver specifications forward path, optical optical input range -8dbm to +2dbm, 0dbm nominal optical wavelength 1290nm to 1600nm optical return loss >45db fiber connector sc/apc, fc/apc return path, optical optical output power choice of 1mw or 2mw optical wavelength 1310nm ±1...

  • Page 5

    5 indoor fiber optic receiver installation and adjustment 1. Power connection under normal circumstances, after the power is connected. Status light lits red. 2. Fiber connection cut off the power and take down the bolt in fiber input port then perform the following steps: • carefully remove the pro...