Quantum ATL 7100 Installation Manual - page 51
Other manuals for ATL 7100:
Operator's Manual
Manual is about: Quantum ATL 7100: User Guide
of
68
Appendix A SCSI Cabling Options
Single-Wire Configuration
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
35
Single-Wire Configuration
1
This configuration of the library has all of the SCSI devices on a
single SCSI bus from the host controller. The host SCSI bus
connects to the rear panel connector labeled
SCSI PORT 1
and is
externally terminated at the connector labeled
SCSI PORT 4 (
see
).
The rear panel connectors labeled
SCSI PORT 2
and
SCSI PORT 3
are not used in this configuration.
Note:
The spare SCSI cable from the accessories kit is required
to configure the library in a single-wire configuration.