Summary of QP350
Page 1
7120350101 qp350 digital two-way radio user manual quantun electronics, llc.
Page 2: Thank You
1 thank you we are grateful for you choice of quantun production. This professional digital two-way radio incorporates the advanced technology and craft. You will be pleased with the quality and features of our product. Please read this manual carefully to ensure you know how to property operate the...
Page 3: Contents
2 contents user safety information compliance with rf energy exposure standards precautions and notices product inspection radio overview parts of the radio the functions of the leds and beeps table programmable auxiliary functions radio embedded features getting started battery antenna accessory in...
Page 4
3 user safety information read this important information on safe and efficient operation before using your quantun portable two-way radio. Compliance with rf energy exposure standards your quantun two-way radio is designed and tested to comply with a number of national and international standards a...
Page 5
4 eu regulatory conformance as certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the directive 1999/5/ec. Please note that the above information is applicable to eu countries only. Precation and notices government law...
Page 6
5 product inspection please carefully take the transceiver out of the box. We recommend that you confirm the items listed in the following table are enclosed before discarding the box. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. Available...
Page 7
6 radio overview parts of the radio 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 (1)power switch (2) antenna (3) volume adjust keys[+] (4) ptt key (5) sk(programmable side key) (6) volume adjust keys[-] (7) microphone (8) charging terminal (9) channel selector knob (10) status indicator ...
Page 8
7 the functions of the leds and beeps table power on when the radio is turned on, the power on alert tone sounds and status indicator flashes green once. When the current channel is a blank channel, the radio sounds beep tone continuously. Power off when the radio is turned off, the power off alert ...
Page 9
8 programmable auxiliary functions the sk key is a programmable function button. Your dealer may assign any of the following auxiliary functions to a short or long programmable key-press. None squelch off squelch off momentary monitor monitor momentary scan power adjust channel lock battery strength...
Page 10: Getting Started
9 getting started battery safety precautions the battery is not fully charged at the factory. It is recommended to charge the new battery for 5 hours before using it. Also, batteries that may have set longer than 2 months since the last charge should be charged before using it. The battery capacity ...
Page 11
10 1. Considering the battery's self-discharge characteristics, fully charge the battery prior to long time storage, to avoid battery damage due to over-discharge. 2. Recharge the battery after 6 months’ storage, to avoid reducing battery capacity due to over-discharge. 3. Notice the ambient humidit...
Page 12
11 use a charger) 4. Make sure the radio is connected to the switching power adapter or the charger. The charging process initiates when the charge indicator of the radio glows orange. 5. The charge indicator glows green when the battery is fully charged. Please remove the radio then. Note: make sur...
Page 13
12 5. The charger indicator glows green when the battery is fully charged. Please remove the battery then. Antenna stubby antennas are ideal for communication within limited range. Fine and long antennas optimizes communication coverage, ideal when the radio is worn on the belt because they are flex...
Page 14
13 figure 2 4. Fit the two extensions at the top of the rear cover into the slots at the top of the radio’s body, slightly press the bottom of the rear cover towards the radio until a click is heard, and then the rear cover is securely attached to the radio, as shown in figure 3. Figure 3 removing t...
Page 15
14 antenna attaching the antenna 1. Align the threaded end of the antenna with the radio’s antenna connector. 2. Turn the antenna clockwise to fasten it, as shown in figure 5. Figure 5 removing the antenna rotate the antenna counterclockwise to remove it. Belt clip attaching the belt clip align the ...
Page 16
15 removing the belt clip loosen the screw to remove the belt clip. Please refer to the operations for attaching the belt clip. Attaching/removing the battery when the belt clip is attached when the belt clip is attached to the radio, please first press the belt clip to make its bottom up, and then ...
Page 17
16 basic operations turn on/off the radio long press the power switch until an alert tone is heard to turn the radio on. The led glows green during power-up. If the current channel is not set, the radio sounds beep tone continuously to turn the radio off, do the same as you turn it on. Adjusting the...
Page 18
17 in standby mode, hold down the ptt key to transmit an all call to the all call contact preset for the current channel. Note: you can transmit an all call only when it is enabled by your dealer. Receiving an all call when an all call is received, you can listen to it without any operation. Note: y...
Page 19
18 advanced operations monitor squelch off in this mode, the speaker is unmuted in any condition so as to receive any sound on the current channel. When audio signal is received on the channel, audio will be heard. Otherwise, background noise will be heard. Operation: press the monitor key to enter ...
Page 20
19 figure 1 normal scan sequence figure 2 priority scan sequence priority channel scan if you prioritize channel 2 as priority 1, the scan operation would proceed in the following sequence, as shown in figure 2. Scan on/off you can enter scan mode through any of the following two methods: (1) key op...
Page 21
20 battery strength indicator qp-350 allows you to simply press the programmed battery strength indicator key to illuminate the status indicator, which gives different indications representing battery strength levels. To exit the indications, release the key. The status indicator gives the following...
Page 22: Troubleshooting
21 troubleshooting trouble solution cannot power on the radio. The battery has run out. Please recharge the battery or replace it with a new one. The battery may not be properly installed. Remove the battery and attach it again. The operating time is noticeably shorter than normal performance, even ...
Page 23
22 care and cleaning do not place the radio in a dusty or dirty environment. Clean the radio with a lint-free cloth to remove dirt or grease, to avoid poor contact due to excessive dust. Clean the radio using a lint-free cloth moistened with clean water and a mild dishwashing liquid. Avoid subjectin...
Page 24
23 service if you need service, contact your quantun dealer. If you find it inconvenient to have service performed by your local dealer, you may contact quantun below: quantun electronics,llc 14005 nw 8 street unit 2, sunrise, florida 33325 usa main line: 954-651-6300 toll free usa: 888-361-0521.