User manual – dynalal dynamic low air loss (dynalal) alternating + pressure relief user manual distributed by: quart healthcare inc. Www.Quarthealthcare.Com.
User manual – dynalal warning connect the master control unit to an appropriate power source do not use the system in the presence of any flammable gases (such as anesthetic agents) keep the pump and mattress away from sources of liquid and open flames keep mattress away from sharp objects the devic...
User manual – dynalal 3-1 alternation cycle illustration control unit features (pump) alternating time can be adjusted in 5min increments to 95 min. In addition, the caregiver can select the “static function” stopping the alternating function and providing only low air loss therapy the auto firm...
User manual – dynalal master control unit mattress replacement features individual air cushion design for maximum pressure distribution. air cells are vented to provide true low air loss therapy with a high flow rate. individual air cushion design for maximum pressure distribution. Alternating...
User manual – dynalal 2. Instructions for proper use i. Remove the existing mattress from the bed frame ii. Replace the standard mattress with mattress replacement system (orient mattress so that the air tube is at the foot of the bed) iii. Secure straps beneath the mattress to the bed frame iv. Han...
User manual – dynalal 3. Cleaning the mattress should be cleaned on the bed weekly using a damp soft cloth and mild detergent. If the top or bottom cover becomes severely soiled, remove, clean as follows, and replace with a clean cover. Covers can be washed and thermally disinfected in a washing mac...
User manual – dynalal cleaning procedure for air filter 1. Air filter is located at the back of the control unit, inside the carry handle. No tools are required to remove it. Air filter must be removed for inspection at least once a month and washed under running tap water if necessary. Squeeze to r...
User manual – dynalal 5. Re-connect the air tubes. The control unit is not working 1. Check the power cord and the power voltage. 2. Check the fuse 1. Use a power regulator 2. Replace with a new fuse some air cells have abnormal low air pressure while the air pressure for other air cells is normal 1...
