Quatech 2.4GHz User Manual - Setting Up

Summary of 2.4GHz

  • Page 1

    2.4ghz wireless a/v sender user manual.

  • Page 2: Package Contents

    1 package contents • transmitter x 1 • receiver x 1 • base stand x 2 • audio/video cable x 2 • power adaptors (dc6v) x 2 • user manual x 1 note: the transmitter and the receiver look very similar. You can find “transmitter” and “receiver” labels on the side of the units. See fig. 1. Product layout t...

  • Page 3: Setting Up

    2 setting up before you make the connection: • set the channel by pressing the select button on the front of the transmitter and the receiver to the same channel. 1. Setting up the transmitter 1.1 connect the transmitter to an a/v device connect the mini-plug of the provided a/v cables to the a/v ja...

  • Page 4: 2. Setting Up The Receiver

    3 note 1: if the a/v equipment has only one output for audio (mono sound only), connect the white plug to that single audio output jack. 1.2 power supply a. Plug one end of the provided power adaptor into a wall outlet and the other end into the rear of the transmitter. See fig. 5. B. Turn on the tr...

  • Page 5

    4 2.1 connect the receiver to a tv a/v connect – for tv with a/v input jacks connect the mini-plug of the provided a/v cables to the a/v jack on the rear of the receiver; connect the other end of the cable to the a/v jacks on the tv labeled audio/video in. See fig. 6. Rf connection – for tv without ...

  • Page 6

    5 note 1: connect the yellow plug to the jack labeled video, the red plug to the jack labeled audio right and the white plug to the jack labeled audio left. Note 2: if the tv has only one input for audio (mono sound only), connect the white plug to that single audio in jack. 2.2 power supply a. Plug...

  • Page 7: Specifications

    6 specifications transmitter/receiver a/v transmitting frequency 2.4ghz a/v signal range 100 meters (300 feet) clear line of sight antenna built-in antenna channel 4 selectable channels audio stereo audio input and output video composite input and output dimensions 12.5 x 8 x 2.5 (cm) for transmitte...

  • Page 8: Care and Maintenance

    7 • if there is a microwave oven in use in the path between the transmitter and receiver, remove the microwave oven or turn it off. • make sure the transmitter and receiver are within range of each other (range of approximately 300 feet; 100 meters in a clear line of sight). Care and maintenance • k...