Quatech DP-PCIE-100 User Manual - Hardware Installation
Other manuals for DP-PCIE-100:
Specifications
of
7
May/07
MN2000000087
3
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card’s bus connector with
the selected PCIe slot on the motherboard. Push the board down
firmly.
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
Please make sure the board is installed before proceeding with driver
installation.