Quatech DSSP-PCIE-100 User Manual - Change Parallel Port Number
May/07
MN2000000079
7
LPT), then double click the MosChip PCI Serial Port you want
to change.
2.
Click the Settings tab and then click Advanced.
3.
Click the down arrow that is next to the COM Port Number box,
select a COM port that is not in use, then click OK.
4.
Click OK, then close Device Manager to save the changes.
Follow steps 1-4 again to change the other serial port if needed.
Change Parallel Port Number
Some parallel devices need a specific parallel port in order to work. If
your parallel device works properly, do not change this setting.
For Windows® 2000/XP/Server 20003/Vista Installation
1.
From the Device Manager window double click Ports(COM &
LPT), then double click the MosChip PCI Parallel Port …
2.
Click Port Settings tab.
3.
At the LPT Port Number box, click the down arrow and select
an LPT port that is not in use.
4.
Click OK, then close Device Manager to save the changes.