May/07 mn 1 pcd-b/pci-st user manual ver. 2.00 all brand names and trademarks are properties of their respective owners..
May/07 mn 2 features z compliant with pci local bus specification 2.3 z compliant with pc card standard release 8.1 specification z works with various types of 16 or 32-bit cardbus pc cards z advanced configuration and power interface (acpi) specification 2.0 compliant z bridge function between pci ...
May/07 mn 3 hardware layout note: the ejector lever can be placed in two positions, locked and unlocked. When inserting a pc card, the lever can be in either position. However, the lever must be in the unlocked position to eject a pc card. To unlock the lever, push it until you hear a click then rel...
May/07 mn 4 general instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. 1. Turn off the power to your computer. 2. Unplug the power cord and remove your comput...
May/07 mn 5 to verify driver installation 1. Check device manager to verify successful driver installation. 2. Look for the following. Windows® 2000/xp/server 2003/vista: double click pcmcia adapters: -generic cardbus controller should be displayed. 3. If this entry doesn’t appear, shut down your sy...
