Summary of GL300W
Page 1
Wcdma tracker gl300w user manual tracgl300wum001 version:1.00
Page 2
Gl300w user manual tracgl300wum001 ‐ 1 ‐ document title gl300w user manual version 1.00 date 2015 ‐ 5 ‐ 25 status release document control id tracgl300wum001 general notes queclink offers this information as a service to its customers, to support application and engineering efforts that use the prod...
Page 3
Gl300w user manual tracgl300wum001 ‐ 2 ‐ contents contents ............................................................................................................................................ 2 0. Revision history .................................................................................
Page 4
Gl300w user manual tracgl300wum001 ‐ 3 ‐ 0. Revision history revision date author description of change 1.00 2015/5/25 hazard.Zhang initial.
Page 5
Supereasy gsm module user manual trac supereasyum001 0 1. Introduction the water resistant gl300w is a powerful gps locator designed for lone worker, vehicle, pet and asset tracking applications. The thumb sized button makes this device ideal for applications requiring rapid notification of emergenc...
Page 6
Supereasy gsm module user manual trac supereasyum001 1 2. Product overview 2.1. Appearance 2.2. Buttons/mini usb interface description button /mini usb interface description power key turn on gl300w turn off gl300w when without charging. (if power key is enabled) function key geo ‐ fence mode long p...
Page 7
Supereasy gsm module user manual trac supereasyum001 2 2.3. Leds description there are three led in gl300w, the description as following. 2.4. External power interface 2.4.1. External dc charger interface the pin2 on mini-usb connector are used for charging and named as vchg pin, it can be connected...
Page 8
Supereasy gsm module user manual trac supereasyum001 3 2.4.2. External battery interface the pin 8 on mini-usb connector is for external battery and named as extbat pin, it can be connected to 3.7v li-ion or li-polymer battery to power gl300w. 2.5. Ignition detection the pin 7 on mini-usb connector ...
Page 9
Supereasy gsm module user manual trac supereasyum001 4 for negative trigger input the electrical conditions are: logical state electrical state active 0v to 0.8v inactive 1.7v to 32v or open an input example is shown as following figures: example of nsw pin connect to a panic button 3. Getting start...
Page 10
Supereasy gsm module user manual trac supereasyum001 5 gl300w data cable (optional accessory) it is the usb data cable which can be used for firmware upgrading and configuration. Gl300w external cable (optional accessory) it is the extend cable which include the charger interface and external batter...
Page 11
Supereasy gsm module user manual trac supereasyum001 6 white ignition detect please refer to 2.5for detail green nsw （ negative trigger input ） please refer to 2.6 for detail 3.4. Turn on/turn off turn on: method 1: press the power key at least 3 seconds and release it to turn on gl300w. At the same...
Page 12
Supereasy gsm module user manual trac supereasyum001 7 4. Troubleshooting and safety info 4.1. Troubleshooting trouble possible reason solution after gl300w is turned on, the wcdma led flashes quickly always. The signal is too weak; gl300w can’t register to the network. Please move gl300w into place...
Page 13
Supereasy gsm module user manual trac supereasyum001 8 warning: this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfere...