Quer KOM0825 Owner's Manual - Power Supply:
9
Owner’s manual
EN
Power supply:
1. Powered with built-in battery.
2. USB power supply.
II. OPERATION:
1. POWER ON/OFF
Before using this product please insert microSD card, all the files will be saved in
the microSD card;
Press and hold
POWER BUTTON for 3 seconds to turn the device ON/OFF.
Note!
DVR will automatically turn on after plugging it charger, and turn off (with 10
seconds delay) after disconnecting it from charging.
To change mode, press
MODE button repeatedly until you reach the desired
mode:
RECORDING > CAMERA > PLAYBACK.
2. RECORDING
1. Press
MODE button to switch to video mode.
2. Press
OK button to start recording.
3. Press
OK button again to stop recording and save the video file.
Recording settings:
• To enter Recording settings enable
RECORDING mode on stand-by, and press
MENU button. Use or buttons to navigate through options, and OK button
to enter / select option.
• Press
MENU again to enter Setup options. Use or buttons to navigate
through options, and
OK button to enter/select option.
• Press Menu button again to go back to
RECORDING MODE.
3. CAMERA
1. Press
MODE button to switch to photo mode.
1. Press
OK button to take a picture.
Camera settings:
• To enter Camera settings enable
CAMERA mode, and press MENU button. Use
or buttons to navigate through options, and
OK button to enter / select option.