Quest Engineering Dry 132D Installation, Operation And Maintenance Instructions
– Read and Save These Instructions –
This manual is provided to acquaint you with the
dehumidifier so that installation, operation and
maintenance can proceed successfully. Ultimate
satisfaction depends on the quality of installation
and a thorough understanding of this equipment.
The dehumidifier is built around tested engineering
principles and has passed a thorough inspection for
quality of workmanship and function.
– Read and Save These Instructions –
Quest Dry 132D:
• Low dewpoint operation
• 132 Pints/Day @ AHAM
• Wide operating range
• 24 Amps total power consumption
• Factory installed 115VAC power cords
(2 required @ 15 Amps each)
• Simple ON/OFF operation with optional
low voltage control for remote/dehumidistat operation
• Vertical or horizontal operation
• Multiple ducting options
Water Removal Rates (Pints/Day)
65 Pints
100°F, 20%
180 Pints
90° F, 90%
150 Pints
80° F, 80%
132 Pints
80° F, 60% (AHAM)
130 Pints
70° F, 80%
120 Pints
70° F, 60%
120 Pints
60° F, 80%
115 Pints
60° F, 60%
125 Pints
50° F, 80%
100 Pints
50° F, 60%
30 Pints
10° F, 80%
4201 Lien Rd
Phone 608-237-8400
Madison, WI 53704
Toll-Free 1-877-420-1330
www.QuestHydro.com info@QuestHydro.com
Specifications subject to change without notice.
1
TS-1030
10/17 Rev. A
Quest Dry
Quest Dry 132D
Installation, Operation and Maintenance Instructions
Installation, Operation and Maintenance Instructions