Quest Engineering MX601 Instructions Manual

Summary of MX601

  • Page 1

    Mx601 / mx601w / mx801 / mx801w.

  • Page 2: A Design First

    1 a design first acoustic design is quite unique. The mx series are a sealed cabinet that allows for a very high ip rating. Despite being a sealed system, the bass response of a ported enclosure is developed using a custom designed lf driver, and proprietary resonance circuit. The benefit of this un...

  • Page 3

    * quest engineering reserves the right to make changes in specifications, or products without prior notice. ** the figures shown above are ‘real world’, usable specifications and are conservative as a result. Quest engineering does not believe in portraying misleading or exaggerated specifications. ...

  • Page 4: Note

    3 ub1 / ub2 bracket instructions 90.0° 90.0° to achieve additional horizontal or vertical positions, it is possible to remove and rotate the steel insert in the ball face 90 degrees. Note attach base plate to wall or ceiling, 1 mate loudspeaker to bracket and lightly fasten locking clamp, 2.

  • Page 5: Note

    4 before installation, if the system requires 70/100v line operation select the correct tap setting by rotating the selector on the rear face of the loudspeaker. Note position loudspeaker to desired pan/tilt, then tighten locking clamp securely – ensuring the locating pin has seated into the ball fa...

  • Page 6: Amplifier Wiring Examples

    16Ω 16Ω 16Ω 16Ω + - + - 15w 15w 15w 15w 15w 15w 15w 15w 16Ω 16Ω 16Ω 16Ω + - + - 15w 15w 15w 15w 15w 15w 15w 15w connector wiring is the same for both examples from amplifier to speakers total amplifier load 120w (not including other parasitic loading, always allow amplifier headroom) 5 amplifier wir...

  • Page 7: Installation Accessories

    6 installation accessories ub2 (ub2w white) installation bracket ipmx1 ceiling pan/tilt mounting kit for mx601/mx801 and mx601w/mx801w connector shroud and cable gland kit required to meet ip67 rating ub1 (ub1w white) installation bracket wall pan/tilt mounting kit for mx601/ mx801and mx601w/mx801w.

  • Page 8: Register Your Product

    Www.Questengineering.Com.Au register your product thank you for choosing quest. Please take the time to complete your product registration. Registering your quest engineering product will: • confirm your warranty • register your product • protect your new product register online: www.Questengineerin...