Quested S8 User Manual - page 12
12
HF EQ:
+/- 2dB @ 10 kHz
PO WER AMPLIFIER
LF output power:
> 220W RMS continuous (note 1)
HF output power:
> 150W RMS continuous (note 1)
THD:
< 0.025% at levels up to 1 dB below clip, 20 Hz-20 kHz. typ 0.005% @ 1kHz.
Hum & Noise:
> -100 dB referred to clip
NOTE 1: The continuous rating is for a period not exceeding 5 minutes with unrestricted airflow (100
mm clearance) around the amplifier heatsinks and an ambient temperature not exceeding 30ºC.
INDICATORS
Amplifier Warming up:
Front mounted flashing green LED indicates that the amplifier is
warming up to reach peak performance.
Normal operation:
green LED indicates power applied and normal operation.
Clip:
Red LED 2 dB before amplifier clip.
Fault indication:
Red constantly on indicates fault.
PO WER REQUIREMENTS
Voltage:
Set by internal plugs: nominal 115V or 230V @ 50-60 Hz AC
230V setting: min 160V; restricted output power: max 255V
115V setting: min 80V; restricted output power: max 127V
C ONSUMPTION
Quiescent:
38W
Typical use:
100W (average music)
Max:
160W (average music)
Note: 0 dBu = 775 mV into open circuit
7
S8 LINE DRAWING