Questyle Audio QP2R User Manual - page 7
Insert/Remove Micro SD Card
1) Copy file “DAP003GL.upt” to your micro SD card and insert it into the card slot.
2) Start QP2R and select “Settings” - “Update firmware” - “Begin”.
3) After update, the display will show “Update is finished”.
Update Firmware
Connect QP2R to your computer with the included USB type C cable.
Connect QP2R to Computer
NOTE
① Insert your micro SD card very gently to avoid damage.
② Do not remove the micro SD card while it is in use, otherwise it may result in
corrupting/deleting data or failure, even damage to the micro SD card.
③ If the the micro SD card can’t be recognized or if it is malfunctioning, please
format the SD card before using it. The FAT32 format is recommended.
06
Micro SD card slot
USB type C port
Insert your micro SD card into the card slot with its face down. Remove the inserted
card by pressing it. ( As shown in the picture. )