• dual band q5 usb device • 2 dual band 5dbi 2.4 & 5.8ghz • antenna • usb cradle • installation cd version 10.4.X thru 10.8.X drivers • instruction manual kit contains the following items: quicky 5 usb 802.11a/b/g/n dual band.
Before installing the software please repair disk permissions. This is done with the disk utility. To locate the disk utility, open finder and click on the applications icon. After you open it, there’s an- other folder titled ‘utilities’. And finally, open disk utility. It’s the hard drive with a st...
Notice at the bottom there’s a button called repair disk permissions. Click this and let this run. In the white box above the button there will be a message that will tell you when permissions are repaired. After it says “permission repairs complete” quit disk utility..
Now pop the cd in and click on the disk image to open your cd. Inside you will nd folders that are labeled 10.4 thru 10.8 on them. You will also find the instruction manual in pdf format. Now , if you’re using a macbook that doesn’t have a cd drive, you’ll need to download the driver from our websit...
You will need to know what os you are running on your computer. If you are unsure what operating sys- tem you are running. Click the apple icon at the top left corner of menu bar. A drop down menu will appear, choose about this mac. Look to see what version you are running. This mac runs 10.8.3!.
Since the os on my imac is 10.5.8 (leopard) i would open the folder 10.5 and click on the install package and follow the screens as directed. If you have os 10.7 or higher, like this computer that runs 10.8.3, double click on the rtusb d2870-4.2.6.0 ui-4.0.8.0_2012_09_28.Dmg file, and use the usbwir...
After you plug the q5 in, a dialog box will appear stating that a new network interface has been detected. Click network preferences but let’s not do anything here yet. The wireless utility will appear automatically every time the unit is plugged in. Available network is the default tab which show a...
We are going to make a profile of our network, so highlight the network that you plan on using, whether it is your own or an open network. Click the add to profile button at the bottom. We are now in the create screen and here you can name your profile what ever you want it is for your use only. I r...
If your network is encrypted- i.E. Password protected there will be a section with the words ‘this network requires a key for the following:’ and it will show you the type of authentication/encryption (i.E. Wpa_psk aes). At the bottom of the screen there will be a section for the network key. If you...
Where is the ralink bar? If the ralink bar doesn’t show up, open up finder and go to the applications folder. Look and see if there is a ralink folder within the applications folder. Open the ralink folder and the ralink icon should appear on the bar the way it’s supposed to. Trouble shooting.
Quickertek, inc 7777 e. Osie street, suite 304a wichita, ks 67207 316.691.1585 316.612.1119 fax 866.691.1585 toll free in us www.Quickertek.Com techsupport@quickertek.Com db-1003.
