QuickSAT QS65 User Manual - page 5
of
12
5
Micro speaker
output socket
Getting Started:
DISH CONNECTIONS
Elevation Meter
F-type
Connector
3.5mm input socket
7)
Connect the F-type connector (screw in
connector) on the 10 metre dual cable (Item C) to
either of the matching screw sockets on the rear
of the dish and the 3.5mm jack plug to the input
socket as indicated above.
8)
Attach the magnetic base of the elevation
meter (Item D) to the bracket
9)
Insert the micro speaker (Item E) in to the
output socket located on the side of the bracket
Please ensure the micro speaker has batteries inserted and the switch is set to ON
Once you have assembled your QuickSAT dish it should look like the image below: