Quidel Sofia Quick Start Manual - page 4
CALIBRATION CHECK
◗
Use the up/down keys to highlight CALIBRATION from the menu.
◗
Press the soft key under the lower right corner of the display screen under SELECT.
◗
Remove Calibration Cassette from the pouch.
Insert the Calibration Cassette into the
analyzer and close the drawer. The analyzer
will perform the Calibration Check
automatically.
The analyzer display will indicate when the
Calibration Check is completed.
NOTE: If Calibration Check cannot be
completed successfully, notify the on-site
Supervisor or contact Quidel Technical
Support for assistance.
The Calibration Cassette will automatically
eject when calibration is complete. Remove
and return the Calibration Cassette to the
storage pouch.
Select OK to return to the Main Menu after
calibration is complete.
Important: Store the Calibration Cassette in
the provided storage pouch between uses.
Run QC according to assay specific package insert.
y
Select
Run Test
Run QC
Review Data
Calibration
Supervisor Menu
Change Mode
Main Menu
06-01-2011 | 14:46
OK
Calibration Results
Calibration passed.
06-01-2011 | 14:46
Cancel
Please insert cassette and close drawer.
Start Calibration
06-01-2011 | 14:46