Quiet Power QP100 Series Installation And Operation Manual - page 6
Quiet Power USB Charger
Installation and Operation Manual
P/N 98-790002 Rev 3
Page 6
1.2.1
Lighted Models
All of the QP100 series chargers are available with connector backlighting. These
units are ordered with a “-L” designator on the model number ( e.g. QP-104-L). The
backlighting is on continuously and projects a soft blue light within the USB
connector entrance. Intensity is adjusted at the factory for a subtle, low-intensity
light suitable for locating the charger connector in darkened cabin conditions.
1.3 Technical Specifications
1.3.1
Physical
The universal charger is housed in an aluminum enclosure.
Dimensions
1.83” high x 1.37” wide x 1.37” deep
Weight
3.5 oz.
1.3.2
Electrical
Input Voltage Range
10 volts to 36 volts D.C. (QP100 – QP102) or 13.2 to 36
volts D.C. ( QP103 – QP104)
Input Current
5 amps absolute maximum, 1 – 2.5 amps average at
rated load
Efficiency
87 to 93%
Output Characteristics
USB Top Port
2.1 amps at 4.8 to 5.2 volts
USB Bottom Port
1.1 amps at 4.8 to 5.2 volts
USB Negotiation
Analog, Apple Products Standard
Auxiliary Output
1 amp at 5, 9, 11, or 12 volts factory preset
Nominal values shown
1.4 Available Models and Options
Quiet Power units are available in the following configurations:
Model
USB Port
Auxiliary Port
QP-100
Dual 5 VDC
None
QP-101
Dual 5 VDC
5 volts
QP-102
Dual 5 VDC
9 volts
QP-103
Dual 5 VDC
11 volts
QP-104
Dual 5 VDC
12 volts
Consult the installation and operations manual of your auxiliary device (hand-held radio etc.)
to confirm charging power requirements.