Quooker scale control Installation Manual - page 6
Installation with COMBI (E)
• Follow the steps below for installing the Scale Control with a Quooker
COMBI or COMBI E tank.
• The ‘Q’ on top of the tank is the on/off switch.
1 Disconnecting
Switch off the tank. Leave the plug in
the socket. Open the boiling-water
tap and let the water run cold. Close
the stop valve on the inlet combina-
tion. Close the tap. Disconnect the
tank inlet hose from the mixing valve.
2 Connecting
Disconnect the head by unscrewing
the grooved knob on top of the Scale
Control. Connect the Scale Control
inlet hose (long) to the mixing valve.
Connect the Scale Control outlet hose
(short) to the tank inlet hose with the
reducing coupler and the fibre washer.
3 Placing
Place the Scale Control into the
kitchen cupboard. Ensure that the
grips of the lid and the container are
aligned. Screw the head firmly into
the lid of the Scale Control.
4 Flushing
Open the stop valve on the inlet
combination. Open the boiling-water
tap and leave the water running until
it is clear. Switch on the tank. The
Quooker is ready for use as soon as
the water has heated up.
1
2
3
4
B
2