1. DL manuals
  2. Qwest
  3. Modem
  4. Premium Motorola 3347
  5. Quick Manual

Qwest Premium Motorola 3347 Quick Manual

Manual is about: Networking Modem

Summary of Premium Motorola 3347

  • Page 1

    © 2008 qwest communications international inc. 1 qwest® premium networking modem: motorola® 3347 how to forward ip ports only experienced network administrators should perform this process. Qwest technical support doesn’t support this process. Use this document if: • you need to configure your modem...

  • Page 2

    © 2008 qwest communications international inc. 2 1. Enter “192.168.0.1” in the address bar of your internet browser. 2. On the modem home page, select advanced setup from the options on the left..

  • Page 3

    © 2008 qwest communications international inc. 3 3. Select configure from the options on the left..

  • Page 4

    © 2008 qwest communications international inc. 4 4. Select nat from the options on the left..

  • Page 5

    © 2008 qwest communications international inc. 5 5. Select the define custom service button..

  • Page 6

    © 2008 qwest communications international inc. 6 6. Select either a range of ports or trigger ports. • a port range is less secure, leaving the mapped ports constantly open regardless of traffic. • trigger ports are more secure, and only open inbound ports when specific outbound traffic is detected....

  • Page 7

    © 2008 qwest communications international inc. 7 7. Enter your service name (e.G. Telnet). Enter your global port range (e.G. -23 to 23). Enter your base host port (e.G. -23). In the “protocol” field, select either the tcp or udp radio button. Then, select the next button..

  • Page 8

    © 2008 qwest communications international inc. 8 8. Select the done button..

  • Page 9

    © 2008 qwest communications international inc. 9 9. On the “nat” page, select the service you added in step 7 (in this example, telnet port 23), from the service name drop-down list. Then, select the enable button..

  • Page 10

    © 2008 qwest communications international inc. 10 10. Select the computer that will be receiving the telnet port 23 traffic, from the select host device drop-down list. Then, select the enable button..

  • Page 11

    © 2008 qwest communications international inc. 11 11. Verify the new service appears under service name..