R For Rabbit Lollipop Pram Instruction Manual & User Manual - page 3
2
Instruction Manual & Guide
Components
Using the Lollipop Pram
TO UNFOLD THE PRAM
• Disengage the storage lock, as per Figure 1.
• Arrange the pram so that all four wheels or wheel posts
are on the ground.
• Grasp the push bar and separate, as per Figure 2. You
will hear several ‘Clicks’.
• Pull the push bar back as far as it will go.
Figure 1 Figure 2
TO ATTACH THE BACK WHEELS
• Lay the Pram upside down.
• Make sure that the red latches are facing the rear of the Pram.
• Push the wheel set into the rear wheel posts, as per Figure 4.
• To remove the back wheels, lay the Pram upside down, peel back the narrow black tab
inside the wheel post and pull the wheel set out. Figure 4