R For Rabbit Picaboo Instructions For Use Manual - page 8
fig 1 which you are traveling)
Step 1. Adjust the handle to the forward position (Fig. 1). Put the seat in
car's seat. Handle must be firmly against the backrest of car's seat
Fig. 1
Step 2. Slide the lap belt of the
Vehicle’s 3-point seatbelt through both Lap belt guides. Let the
tongue plate snap in the belt lock with a clearly audible “click”.
Pull the shoulder belt in narrow direction to tighten the
lap belt. Check to make sure the tongue plate is locked by pulling on
the belt(Fig. 2).
Fig. 2
Step 3. Place the diagonal belt in the
diagonal belt guide at the back of the seat(Fig. 3)
Fig. 3
Step 4. Tighten the vehicle`s own 3-point seatbelt by pulling hard
on the positions showed in fig. 3 and fig. 4.
Fig.
4
7
4
relative to the child
car seat manufactu
Step 5. The satisfactory position of the adult safety-belt buckle car seat
is as the Fig 5. You can contact the child rer if in doubt
about this point.
Fig
. 5