1. DL manuals
  2. R.P.S. Corporation
  3. Scrubber
  4. 250-13
  5. Operator And Parts Manual

R.P.S. Corporation 250-13 Operator And Parts Manual

Summary of 250-13

  • Page 1

    2222 5555 0000 ssss eeee rrrr iiiieeee ssss ope ope ope operrrra a a atttto o o orrrr a a a an n n nd d d d p p p pa a a arrrrtttts s s s man man man manu u u ua a a allll m m m mo o o od d d de e e el l l l 2 2 2 25 5 5 50 0 0 0 r.P.S. Corporation phone: 1-800-450-9824 p.O. Box 241 fax: 1-866-632-6...

  • Page 2

    How to use this manual this manual contains the following sections: - how to use this manual - safety - operations - maintenance - parts list the how to use this manual section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from authorized tom...

  • Page 3: Page 1

    Page 36-39 page 40-43 page 44-47 page 48-51 page 52-53 page 54-59 page 60-61 page 62-63 page 64-69 page 70-33 page 74-75 page 76-77 page 78-79 page 80-83 page 84-87 page 88-93 page 94-99 page 100-101 page 102-103 page 104-105 page 106-107 page 108-109 page 110-111 page 112-113 machine information pl...

  • Page 4: Page 2

    Warranty registration form ***complete form immediately and fax back to (886)901-3335*** distributor:________________________________________________________ serial number:_________________ location (city, state):_________________________________________ install date:____________________ customer:__...

  • Page 5: Page 3

    Page 3 250 poly (3/8" thick) 7 ga. (3/16" steel) (2) 12" x 5" (2,200 lb. Cap.) 10" x 3" 54" x 26" x 55" 32" 784 lbs. 1,222 lbs 1,414 lbs 0-250 lbs 0-500 lbs (5) w/auto. Adjust. 250-13: (2) 13" (scrubs 26") 250-15: (2) 15" (scrubs 30") 250-17: (2) 17" (scrubs 34") 300 rpm (2) 0.75 hp (2) 1.0 hp @ 350...

  • Page 6: Page 4

    Common wear parts page 4 item brush type brushes super-grit tough-grit midi-grit light-grit poly (.028) nylon (.016) pad driver pads super black black brown green blue red white extra pad driver retaining clip: 40-433 brush repair kit: 40-423 replacement locating clip for all disk brushes squeegee k...

  • Page 7: Page 5

    Scrub brushes there are many different types of brushes available to cover applications from cleaning heavily soiled floors to polishing. A pad driver is also available to take advantage of the many cleaning pads on the market. Please refer to the following to assist in selecting the proper brush or...

  • Page 8: Page 6

    Safety messages your safety, and the safety of others, is very important, and operating this unit safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other safety information in the manual. This information informs you of...

  • Page 9: Page 7

    !! Safety precautions!! Warning: hazardous voltage. Shock, burns or electrocution can result. Always discon- nect the batteries before servicing machine. Warning: batteries emit hydrogen gases, explosion or fire can result. Keep sparks and open flames away. Warning: charge unit in a well ventilated ...

  • Page 10: Page 8

    Machine controls and features page 8 6 5 7 1 3 4 8 2 9 43 46 42 41 44 45 47 50 48 49 51 31 36 35 40 39 38 32 33 34 37 26 25 24 27 28 29 30 16 17 19 20 18 21 23 22 22 13 12 14 10 11 15.

  • Page 11: Page 9

    Page 9 controls and functions 1. Steering wheel: steers the machine. 2. Adjustable seat with arm rests: your machine is equipped with an adjustable seat with arm rests. 3. Recovery tank lid: latch must be secured for recovery tank to seal properly. 4. Headlight: helps you see in low light areas and ...

  • Page 12: Page 10

    Page 10 figures 7-10. 1. Battery level indicator - indicates the energy level remaining in the batteries. (shown on all menu displays) 2. Scrubbing deck down pressure gauge - sets the down pressure on the brushes. (see figure 7.) 3. Vacuum on - indicates the vacuum is "on" . (see figures 7. And 8.) ...

  • Page 13: Page 11

    Page 11 machine setup uncrating machine and conecting batteries 1. Carefully check the crate for any signs of damage. Batteries are in the unit. 2. To uncrate the machine, remove banding from around the crate. Take off the top and sides and dispose of properly. 3. Remove banding from machine. Remove...

  • Page 14: Page 12

    2. Loosen the two knobs on the squeegee and slide them into the slots in the squeegee mounting plate. (see picture below) 3. Tighten the knobs, and connect vacuum hose from the machine to the squeegee. (see picture below) 4. You may have to adjust the squeegee pitch, by using the pitch adjustment kn...

  • Page 15: Page 13

    1. Turning adjustment knob clock-wise (tightening) will raise tips & lower center. (see picture to the left) 2. This squeegee is adjusted too far back and will not pick up on the corners. *note tips off the floor. (see picture to the left) 3. This squeegee is adjusted too far forward and will not pi...

  • Page 16: Page 14

    Leveling deck page 14 1. Drive machine to a flat level surface and turn machine off. (see picture to the left) 2. With the shrouds and brushes off, measure the from the ground to the bottom of all four corners of the scrub deck. (see picture to the left) 3. If the measurements are not the same the d...

  • Page 17: Page 15

    Page 15 ***for correct pad application , call your local dealer*** 1. Turn "on" machine power 2. Raise the scrub deck by depressing the brush switch to the up and off position and turn machine power "off". Disconnect batteries. (see picture to the left) 3. Remove shrouds to access scrubdeck (see pic...

  • Page 18: Page  16

    Page 16 1. The shroud must be adjusted corectly in order to have proper water control during turns. The front of the shroud should be slightly higher than the rear. (see picture to the left) 3. Spin the shroud support up or down to get adjustments. (see picture to the left) 2. To adjust shrouds loos...

  • Page 19: Page 17

    Solution system access from left side of machine 1. 3/4" gate valve 2. Stainless steel inline filter 3. Solenoid valve (see picture to the left) 1. To clean filter close 3/4" gate valve (a) . (see picture to the left) page 17 2. Unscrew clear lid (b) , remove stainless steel screen (c), rinse screen...

  • Page 20: Page 18

    1. The "high recovery" light (red) will illuminate (a) when the recovery tank is full. Stop immediately and drain recovery tank.(see picture to the left) 2. If red light is ignored the vac will overheat . (see picture to the left) 3. If vac is pulling excessive current, circuit breaker (25 amp) may ...

  • Page 21: Page 19

    Page 19 one pass scrubbing steps: (see picture below) 1. Turn machine on with the key switch. 2. Lower squeegee by pressing the switch. 3. Lower scrub head to the floor, use the top half of the brush switch. 4. Adjust the solution knob to the desired setting. (set half way), turn clockwise for less,...

  • Page 22: Page 20

    Page 20 double scrubbing steps: (see picture below) 1. Turn machine on with the key switch. 2. Lower scrub head to the floor, use the top half of the brush switch. 3. Adjust the solution knob to the desired setting. (set half way), turn clockwise for less, counter-clockwise for more. 4. Begin scrubb...

  • Page 23: Page 21

    Page 21 1. Observe the amount of solution the machine is dispensing on the floor and adjust to the desired flow. To increase the solution flow rate, rotate blue knob counter-clockwise. (see picture to the left) 2. Keep an eye on the "red" recovery full light to make sure there is not foamy buildup i...

  • Page 24: Page 22

    Draining solution tank to drain left over cleaning solution from the solution tank, perform the following steps. 1. Rotate the (blue) solution tank drain valve located in the front left side of the frame (see picture below) b 2. Unscrew cap and begin draining. (see picture below) 3. Once tank is emp...

  • Page 25: Page 23

    Recovery tank drain saver page 23 recovery tank float shut-off when water is no longer being vacuumed from the floor and the vacuum fan is operating, the ball float has engaged the red high recovery light will come on. (see picture below) the vacuum motor will not vacuum water with recovery tank ful...

  • Page 26: Page 24

    Page 24 standard charger caution: the following instructions are intended for the 36v charger supplied with the machine. Do not use any other charger with this machine. Standard battery charging 1. Transport machine to a well ventilated area for charging. 2. Turn the machine off. 3. Hinge open the t...

  • Page 27: Page 25

    Optional battery charging on board charger caution: the following instructions are intended for the 36v charger supplied with the machine. Do not use any other charger with this machine. 1. Transport machine to a well ventilated area for charging. 2. Turn the machine off. 3. Hinge open the tank to e...

  • Page 28: Page 26

    Changing batteries stop machine in a clean area next to the charger. Turn off machine. For safety : before leaving or servicing the machine; stop on level surface, turn off machine and remove key. 1. Tip back tank to expose batteries. 2. Disconnect main battery cables from machine. 3. Use the proper...

  • Page 29: Page 27

    Page 27 yearly maintenance 1. Call your local dealer for yearly maintenace storing machine 1. Be sure to flush the tanks out completely, and to drain all water from the machine. 2. Open the recovery tank lid to promote air circulation. 3. Raise brushes and squeegee. Daily maintenance 1. Remove and c...

  • Page 30: Page 28

    Page 28 maintenance service schedule maintenance before each work period after each work period 50 hrs 100 hrs 200 hrs check water level of batteries after charging; add distilled water if necessary * check that recovery tank cover seals tightly * visually check for damaged or worn tires * check bru...

  • Page 31: Page 29

    Page 29 preventative maintenance records use this form to make copies for your internal records preventative maintenance checked note rotate brushes _____________ ____________________________________ rotate side brooms _____________ ____________________________________ drain solution tank __________...

  • Page 32: Page 30

    Page 30 preventative maintenance records use this form to make copies for your internal records preventative maintenance checked note rotate brushes _____________ ____________________________________ rotate side brooms _____________ ____________________________________ drain solution tank __________...

  • Page 33: Page 31

    Page 31 troubleshooting central command ii note: this machine is operated by a sophisticated electronic "controller" that has many fail-safes within it. It self-analyzes problems and flashes a four-digit alpha-numeric code of what is wrong in the lcd window. Most of these codes require a technician'...

  • Page 34: Page 32

    Page 32 9. All other error codes. Turn off the key, and disconnect the positve battery cable from the batteries for more than one minute (the time is needed to drain the controler's on-board capacitor). Reconnect cables, being sure that it is tight. Too loose and you will burn battery. If you overti...

  • Page 35: Page 33

    Page 33 problem no power, nothing operates brush motor(s) do not operate drive motor does not operate vacuum motor does not operate drive motor runs incorrectly insufficient solution flow cause faulty key switch batteries need charging faulty battery loose battery cable main circuit breaker tripped ...

  • Page 36: Page 34

    Trouble shooting page 34 problem no solution flow poor water recovery poor water recovery on turns rear tires noisy poor traction short run time cause no solution in tank solution valve off solution switch off solution screen clogged faulty solution solenoid faulty solution switch recovery tank is f...

  • Page 37: Page 35

    Model 250-13/250-15/250-17 machine parts section page 35 page 36-39 page 40-43 page 44-47 page 48-51 page 52-53 page 54-59 page 60-61 page 62-63 page 64-69 page 70-33 page 74-75 page 76-77 page 78-79 page 80-83 page 84-87 page 88-93 page 94-99 page 100-101 page 102-103 page 104-105 page 106-107 page...

  • Page 38: 250 Disk Front Wall

    250 disk front wall 3 4 1 10 5 2 6 13 3 7 7 10 10 10 5 10 10 10 10 6 1 11 11 11 11 11 11 14 11 11 8 8 7 7 13 13 12 page # 36.

  • Page 39: 250 Disk Front Wall

    Item part no. Part description qty. 1 21-4044 3/4" npt to 3/4" barbed elbow 2 2 250-1260 front splash guard 1 3 h-01519 1/4-20 x 1/2 " u bolt 2 4 h-29049 pph #10-32 x 1/2" 2 5 h-70858 nylok #10-32 ss 2 6 250-1265 scrub arm bracket 2 7 h-70860 nylok 1/4"- 20 ss 4 8 h-081 clamp 1.0"- 1-1/8" ss 2 10 h-...

  • Page 40: Front Panel

    4 5 3 2 7 5 3 6 3 5 6 3 5 2 2 4 4 4 6 6 6 6 6 9 13 10 4 4 4 4 2 2 2 9 9 6 6 9 9 11 6 6 12 1 page # 38 front panel 15 13 17 15 13 13 14 16 optional.

  • Page 41: Front Panel

    Item part no. Part description qty. 1 250-1100 main frame 1 2 h-74430 cb 5/16"- 18 x 1" ss 6 3 h-71065 lw 5/16" ss 4 4 h-73908 fhscs 5/16"- 18 x 1-1/4" ss 8 5 h-78015 fw 5/16" x 3/4" ss 4 6 h-70861 nylok 5/16" - 18 ss 14 7 439 sub #439 250 disk front wall 1 9 h-74419 cb 1/4"- 20 x .75" ss 7 10 h-708...

  • Page 42: Front Wheel Assembly

    Front wheel assembly 29 27 23 26 19 22 21 20 18 24 5 16 6 8 17 14 15 9 10 11 12 13 28 1 2 3 4 5 22 4 11 26 10 12 23 31 30 30 30 30 page # 40 32.

  • Page 43: Front Wheel Assembly

    Item part no. Part description qty. 1 5-826 10 tooth sprocket 1 2 5-831 master link 1 3 8-723 bearing block 1 4 8-723b bearing 2 5 h-33618 lw 1/4" 2 6 250-7120 steering shaft, lower 1 8 250-7314 60 tooth steering sprocket 1 9 250-7332 steering shaft 1 10 37-7317 tapered roller bearing 2 11 37-7318 b...

  • Page 44: Front Wheel Drive

    3 5 4 1 1 2 2 1 1 4 5 1 4 5 1 4 5 2 2 2 2 2 6 4 5 2 1 1 4 5 5 4 front wheel drive page # 42.

  • Page 45: Front Wheel Drive

    Item part no. Part description qty. 1 h-70861 nylok 5/16" - 18 ss 10 2 h-74430 cb 5/16"- 18 x 1" ss 10 3 250-1100 main frame 1 4 h-71065 lw 5/16" ss 7 5 h-78015 fw 5/16" x 3/4" ss 7 6 233 sub #233 250 front wheel assembly 1 front wheel drive page # 43.

  • Page 46: 250 Rear Axle Mount

    250 rear axle mount 6 22 19 12 8 1 3 34 2 14 19 22 22 18 5 5 18 15 20 20 23 24 25 5 9 9 9 16 26 27 28 10 10 15 29 30 31 31 29 30 page # 44 33 32.

  • Page 47: 250 Rear Axle Mount

    Item part no. Part description qty. 1 250-1102 scrub deck lifting bracket 1 2 250-5250 36v vac motor, tangental 1 3 250-5000 axle mount 1 5 h-74429 cb 5/16"- 18 x 3/4" ss 3 6 290-6186 1/2-20 x 1-1/4 " u bolt 4 8 190-1450 vac box 1 9 h-70861 nylok 5/16" - 18 ss 3 10 h-77864 nylok 1/2"-13 ss 8 12 h-77...

  • Page 48: Rear Axle Mount

    4 5 6 7 1 1 2 4 4 4 5 5 5 4 4 4 4 4 4 1 7 6 1 7 6 6 7 1 4 3 rear axle mount page # 46.

  • Page 49: Rear Axle Mount

    Item part no. Part description qty. 1 h-70861 nylok 5/16" - 18 ss 15 2 250-1100 main frame 1 3 540 sub #540 250 rear axle mount 1 4 h-74430 cb 5/16"- 18 x 1" ss 11 5 h-73908 fhscs 5/16"- 18 x 1-1/4" ss 4 6 h-78015 fw 5/16" x 3/4" ss 4 7 h-71065 lw 5/16" ss 4 rear axle mount page # 47.

  • Page 50: Squeegee Drag Plate

    Squeegee drag plate 16 16 6 7 3 9 11 11 12 12 16 8 16 12 1 10 8 8 5 2 2 2 20 21 19 18 17 16 13 15 21 14 13 16 8 8 16 13 15 13 16 17 13 19 19 18 19 21 20 page # 48 16 4.

  • Page 51: Squeegee Drag Plate

    Item part no. Part description qty. 1 250-7131 squeegee swing plate 1 2 4-446 grommet-3/8 id x 1-1/2 od x .375 3 3 250-7150 squeegee trail arm 1 4 21-7205 star knob 1 5 h-10055 hcs 3/8"- 24 x 3.5" ss 1 6 21-7240 spring, 1/2" id x 1-3/4" lg 1 7 21-7610 squeegee triangle plate 1 8 h-77862 nylok 3/8"-1...

  • Page 52: Squeegee Drag Plate

    2 4 1 3 7 6 5 5 5 5 squeegee drag plate page # 50

  • Page 53: Squeegee Drag Plate

    Item part no. Part description qty. 1 h-77205 hcs 1/2"-13 x 1" ss 1 2 202 sub #202 250 squeegee drag plate 1 3 250-2240 2 inch stroke 36 volt actuator 1 4 250-1100 main frame 1 5 h-74430 cb 5/16"- 18 x 1" ss 4 6 h-37032 jam nylok nut, 1/2"- 13 1 7 h-70861 nylok 5/16" - 18 ss 1 squeegee drag plate pa...

  • Page 54: Hoses/wiring Harness

    Hoses/wiring harness page # 52 4 7 6 6 5 2 1 9 8 19 17 18 11 1 10 3 12 13 20 14 15 16.

  • Page 55: Hoses/wiring Harness

    Item part no. Part description qty. 1 h-54632 5/8" barbed elbow 3 2 h-70860 nylok 1/4"- 20 ss 2 3 h-72710 fhp 1/4"- 20 x 1" ss 2 4 5-891 pump, water jet 1 5 390-7245 adj solution flow valve, 36v 1 6 h-02930 3/4 " plastic barb tee 2 7 21-1602 3/4 barb elbow 1 8 290-4550 1/2" npt ball valve 1 9 21-404...

  • Page 56

    30 34 21 22 34 20 1 30 27 29 35 35 26/30 scrub deck 10 8 8 7 5 13 36 35 26 32 32 for 26 inch deck use part number 250-1080 for 30 inch deck use part number 250-1124 for 26 inch deck use part number 13-421 qty. (2) for 30 inch deck use part number 15-421 qty. (2) 18 12 37 16 2 37 15 39 note: bolts an...

  • Page 57

    Item part no. Part description qty. 1 21-5000 brush driver 2 2 21-7205 star knob 4 3 250-0117 5/8 id x 9" hose 1 4 250-0118 5/8 id x 10" hose 1 5 250-1078 26/30 rear deck curtain 1 6 250-1080 25" front curtain band 1 7 250-1081 26/30 rear curtain band 1 8 250-1084 shroud adjustment knob 4 9 250-1103...

  • Page 58

    19 7 6 8 19 7 5 1 34 inch scrub deck 16 17 13 2 12 39 14 2 20 2 3 4 9 40 10 10 page # 56 6 23 25 15 29 15 19 6 7 26 23 18 20 21 22 27 30 30 30 30 30 37 38 30 28 34 32 35 36 31 34 24 32 35 36 24 30 30 30 30 30 11 32 33 2 33.

  • Page 59

    34 inch scrub deck page # 57 item part no. Part description qty. 1 290-1233 3/8" id, 1/2" od, 1/4" lg bearing 2 2 h-71067 lw 3/8" ss 16 3 250-1079 33 front deck curtain band 1 4 250-1310 33" front deck curtain 1 5 h-74430 cb 5/16"- 18 x 1" ss 4 6 h-71065 lw 5/16" ss 4 7 h-78015 fw 5/16" x 3/4" ss 4 ...

  • Page 60: Scrub Deck

    2 5 10 4 5 12 5 10 9 1 5 11 10 5 12 8 5 4 5 10 6 scrub deck 5 page # 58 8 3 7 3 7.

  • Page 61: Scrub Deck

    Item part no. Part description qty. 1 h-70712 hn 3/8"-16 ss 4 2 h-77862 nylok 3/8"- 16 ss 2 3 290-1233 3/8" id, 1/2" od, 1/4" lg bearing 4 4 290-1245 3/8" id, 1/2" od, 3/8" lg, flange bearing 2 5 h-71017 fw 3/8" x 7/8" ss 12 6 542 sub #542 250 26 inch scrub deck 1 7 h-99001 fw 3/8" ss 2 8 h-70110 hc...

  • Page 62: Squeegee Lifting

    6 squeegee lifting bracket and hinges 2 5 2 3 7 1 4 page # 60

  • Page 63: Squeegee Lifting

    Item part no. Part description qty. 1 h-74419 cb 1/4"- 20 x .75" ss 8 2 h-74430 cb 5/16"- 18 x 1" ss 3 3 h-70861 nylok 5/16" - 18 ss 3 4 5-122 hinge 8" ss 2 5 h-70860 nylok 1/4"- 20 ss 8 6 250-1100 main frame 1 7 250-1099 squeegee lifting bracket 1 squeegee lifting bracket and hinges page # 61.

  • Page 64: Crimp Nuts

    1 crimp nuts 1 3 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 2 2 1 2 2 1 page # 62.

  • Page 65: Crimp Nuts

    Item part no. Part description qty. 1 h-1032hcn hcn #10-32 6 2 h-312hcn hcn 5/16"-18 15 3 250-1100 main frame 1 crimp nuts page # 63.

  • Page 66: Central Command Ii

    Central command ii 22 7 8 12 10 1 9 13 21 11 3 18 5 4 2 19 14 6 20 15 16 17 16 16 22 22 15 21 page # 64.

  • Page 67: Central Command Ii

    Item part no. Part description qty. 1 h-01196 protective boot, toggle switch, (red) 1 2 290-2891 lcd screen 1 3 7-229 push button switch 1 4 290-2310 full recovery (red) 1 5 290-2300 low solution (amber) 1 6 390-1501 central command decal 1 7 h-01200 protective boot, toggle switch, (black) 1 8 h-011...

  • Page 68: Central Command Ii

    13 14 23 22 19 21 20 15 4 11 7 10 12 24 18 6 1 3 17 16 8 5 9 2 19 19 15 19 15 19 22 20 22 20 20 22 19 19 19 19 23 23 23 23 23 23 23 21 21 23 21 21 21 21 21 21 19 15 page # 66 19 central command ii.

  • Page 69: Central Command Ii

    Item part no. Part description qty. 1 290-2890 computer control v3 1 2 5-892 toggle, on-off spst 5 3 290-8370 fuse, resettable, 50 amp, 50v dc max 3 4 7-283 switch, toggle, mom/off/mom (dpdt) 1 5 5-293 15 amp relay 1 6 290-2020 bracket 1 7 7-292 5k potentiometer 1 8 5-289 cir breaker 24v 50a 4 9 5-3...

  • Page 70: Central Command Ii

    Central command ii 3 1 2 4 2 2 1 1 page # 68.

  • Page 71: Central Command Ii

    Item part no. Part description qty. 1 h-70053 hcs 5/16"- 18 x 3/4" ss 3 2 h-71065 lw 5/16" ss 3 3 250-1100 main frame 1 4 461 sub #461 250 series p & g ccm ii 1 central command ii page # 69.

  • Page 72: Steering Upright

    Steering upright 27 33 28 34 20 23 15 36 13 26 18 16 1 32 12 2 3 7 20 19 23 16 20 20 18 37 26 37 35 20 20 6 39 38 5 30 29 21 18 21 18 27 27 27 27 27 8 10 11 24 31 page # 70

  • Page 73: Steering Upright

    Item part no. Part description qty. 1 21-0101 serial no. Pl. (tomcat) 1 2 4-260 connector, grey 50 1 3 4-352 bearing 1 5 430-2910 36v headlight 1 6 8-292 backup alarm 1 7 4-364a flange, 1.75" id 2 8 8-294b push button switch, silver 1 10 292-1170 lower steering tower 1 11 292-1171 upper steering tow...

  • Page 74: Steering Upright

    Steering upright 1 3 3 3 3 2 7 6 4 5 8 8 8 8 page # 72.

  • Page 75: Steering Upright

    Item part no. Part description qty. 1 250-1100 main frame 1 2 290-7110 u-joint 1 3 h-70053 hcs 5/16"- 18 x 3/4" ss 4 4 481 sub #481 36 volt steering upright 1 5 290-7090 steering shaft, upper 1 6 8-703 steering wheel 1 7 8-701a steering cover 1 8 h-71065 lw 5/16" ss 4 steering upright page # 73.

  • Page 76: Front Apron

    Front apron 1 6 6 6 5 6 5 6 5 6 5 5 5 4 2 3 2 3 2 3 2 3 page # 74 7.

  • Page 77: Front Apron

    Item part no. Part description qty. 1 250-1100 main frame 1 2 h-70053 hcs 5/16"- 18 x 3/4" ss 4 3 h-71065 lw 5/16" ss 4 4 250-1180 front apron 1 5 h-76061 fw 1/4" nylon 6 6 h-73754 bhscs 1/4 - 20 x 3/4 ss 6 7 tomcat sticker 1 front apron page # 75.

  • Page 78: Drive Pedal

    Drive pedal 3 4 3 1 1 2 2 1 2 1 2 5 3 3 6 page # 76.

  • Page 79: Drive Pedal

    Item part no. Part description qty. 1 h-70053 hcs 5/16"- 18 x 3/4" ss 4 2 h-71065 lw 5/16" ss 4 3 h-29073 pph #10-32 x 1" 4 4 250-1610 non skid floor plate 1 5 290-1173 drive cover 1 6 8-290 foot pedal 1 drive pedal page # 77.

  • Page 80: Batteries And Cables

    Batteries and cables 5 5 5 5 5 5 5 5 1 6 page # 78 2 7 8 9 4 3 4.

  • Page 81: Batteries And Cables

    Item part no. Part description qty. 1 250-1100 main frame 1 2 4-124 latch 1 3 h-72716 fhp 1/4"- 20 x 3/4" 4 4 250-0113 black battery drain hose 1 5 250-2110 battery 6 v 245 ah 6 6 250-1480 battery box 1 7 5-447 1/2 npt x 1/2" barb elbow 1 8 h-07005 1/2" npt locknut 1 9 250-0099 battery cable harness...

  • Page 82: Sol/rec Tank

    Sol/rec tank 26 30 1 14 21 5 30 30 20 17 17 18 25 page # 80 2 1 1 19 27 21 23 24 24 20 29 16 3 15 4 11 22 8 19 6 28 13 7 10 9 12 red 250-4141 granite 250-4140

  • Page 83: Sol/rec Tank

    Item part no. Part description qty. 1 190-1210 2.0 npt x 2.0" barb 3 2 21-4044 3/4" npt to 3/4" barbed elbow 1 3 21-4072 hose cuff, 1 1/2" 1 4 21-4075 1 1/2 npt x 1 1/2 m h. Barb 1 5 21-4085 vac screen 1 6 21-7060 vac box 1 7 250-0081 upper tank brace 1 8 250-0112 sight tube 1 9 250-1082 1-1/2" od x...

  • Page 84: Solution/recovery

    Solution/recovery tank 1 3 3 3 2 page # 82 5 3 3 3 2 4 6.

  • Page 85: Solution/recovery

    Item part no. Part description qty. 1 250-1100 main frame 1 2 5-122 hinge 8" ss 2 3 h-70003 hcs 1/4"- 20 x 3/4" ss 6 4 250-7210 drain hose 1 5 250-0114 drain hose guard 1 6 502 sub #502 250 sol/rec tank 1 solution/recovery tank page # 83.

  • Page 86: Tank Lid

    Tank lid 5 6 8 3 1 2 7 5 5 5 5 5 5 5 6 6 7 4 9 10 10 15 14 11 13 11 14 12 13 page # 84.

  • Page 87: Tank Lid

    Item part no. Part description qty. 1 250-4050 recovery tank gasket 1 2 250-4051 recovery lid 1 3 190-1075 tank clear cover gasket 1 4 190-1410 vac formed clear cover 1 5 h-70003 hcs 1/4"- 20 x 3/4" ss 8 6 h-37708 1/4-20 lc acorn nut 8 7 5-122 hinge 8" ss 2 8 h-71063 lw 1/4" ss 8 9 h-70710 hn 1/4"- ...

  • Page 88: Tank Lid

    Tank lid 1 4 4 4 4 4 4 4 3 2 page # 86 4.

  • Page 89: Tank Lid

    Item part no. Part description qty. 1 502 sub #502 250 sol/rec tank 1 2 250-7180 drain hose bracket 1 3 503 sub #503 recovery tank lid 1 4 h-71893 1/4 x 3/4 self tapping screw 8 tank lid page # 87.

  • Page 90: Left 250 Shrouds

    Left 250 shrouds 3 3 3 3 3 3 4 4 4 4 4 4 1 2 page # 88 (note 26" shown) for 26" shroud use part # 250-1126 for 30" shroud use part # 250-1128 for 34" shroud use part # 250-1138.

  • Page 91: Left 250 Shrouds

    Item part no. Part description qty. 1 250-1139 shroud curtain 1 2 250-1140 shroud curtain band 1 3 h-74419 cb 1/4"- 20 x .75" ss 6 4 h-nj04c jnyl 1/4" - 20 ss 6 page # 89 left 250 shrouds.

  • Page 92: Right 250 Shrouds

    Right 250 shrouds 3 3 3 3 3 3 2 1 4 4 4 4 4 4 (note 26" shown) for 26" shroud use part # 250-1125 for 30" shroud use part # 250-1129 for 34" shroud use part # 250-1137 page # 90

  • Page 93: Right 250 Shrouds

    Item part no. Part description qty. 1 250-1139 shroud curtain 1 2 250-1140 shroud curtain band 1 3 h-74419 cb 1/4"- 20 x .75" ss 6 4 h-nj04c jnyl 1/4" - 20 ss 6 page # 91 right 250 shrouds.

  • Page 94: 250 Shrouds

    250 shrouds 3 2 1 page # 92 (note 26" shroud shown) for 30" shroud use part # 548 for 34" shroud use part # 550 (note 26" shroud shown) for 30" shroud use part # 549 for 34" shroud use part # 551.

  • Page 95: 250 Shrouds

    Item part no. Part description qty. 1 542 sub #542 250 25 inch scrub deck 1 2 546 sub #546 250 right 25 inch shrouds 1 3 547 sub #547 250 left 25 inch shrouds 1 250 shrouds page # 93.

  • Page 96: 32 Inch Squeegee

    15 1 10 9 4 5 2 23 21 13 7 14 12 3 10 16 2 6 32 inch squeegee 25 24 24 15 20 19 22 15 15 15 9 10 11 15 15 17 10 15 use red locktite on stud into squeegee body 25 24 20 11 page # 94 8 18.

  • Page 97: 32 Inch Squeegee

    Item part no. Part description qty. 1 h-70065 hcs 5/16"- 18 x 3" ss 2 2 h-71015 fw 5/16" x 3/4" sae ss 4 3 21-7600 side wheel (grey) 2 4 h-33371 5/16" id shaft collar 2 5 h-70711 hn 5/16"- 18 ss 2 6 h-71065 lw 5/16" ss 2 7 22-755g front squeegee blade 1 8 23-7170 squeegee band, front 1 9 h-00288 pph...

  • Page 98: 35 Inch Squeegee

    21 22 1 8 4 5 16 15 17 2 20 6 19 18 14 7 12 13 11 25 3 23 35 inch squeegee 8 9 9 10 10 9 9 24 20 15 15 15 15 15 15 15 use red locktite on stud into squeegee body page # 96 2 17.

  • Page 99: 35 Inch Squeegee

    35 inch squeegee page # 97 item part no. Part description qty. 1 h-70065 hcs 5/16"- 18 x 3" ss 2 2 h-71015 fw 5/16" x 3/4" sae ss 4 3 5-760b side wheel (grey) 2 4 h-33371 5/16" id shaft collar 2 5 h-70711 hn 5/16"- 18 ss 2 6 h-71065 lw 5/16" ss 2 7 25-7170 squeegee band, front 1 8 h-72555 pph #10-32...

  • Page 100: 250 Squeegee

    1 2 3 250 squeegee page # 98.

  • Page 101: 250 Squeegee

    Item part no. Part description qty. 1 360 sub #360 32 inch squeegee assembly 1 2 202 sub #202 250 squeegee drag plate 1 3 250-0115 squeegee hose 1 250 squeegee page # 99.

  • Page 102: Right 250-30 Door

    Right 250-30 door 5 1 3 2 item part no. Part description qty. 1 250-9591 right 250-29 door 1 2 5-130 door latch 1 3 5-122 hinge 8" ss 1 5 h-74419 cb 1/4"- 20 x .75" ss 4 6 h-70860 nylok 1/4"- 20 ss 8 7 21-1126 roller bracket 1 8 21-1127 roller 1 9 h-11319 hb 5/8"- 11 x 4" 1 10 h-37038 jnyl 5/8"- 11 ...

  • Page 103: Left 250-30 Door

    3 1 5 2 9 7 10 12 6 6 item part no. Part description qty. 1 250-9590 left 250-29 door 1 2 5-122 hinge 8" ss 1 3 5-130 door latch 1 5 h-74419 cb 1/4"- 20 x .75" ss 4 6 h-70860 nylok 1/4"- 20 ss 8 7 21-1126 roller bracket 1 8 21-1127 roller 1 9 h-11319 hb 5/8"- 11 x 4" 1 10 h-37038 jnyl 5/8"- 11 1 11 ...

  • Page 104: Right 250-34 Door

    Right 250-34 door 5 1 3 2 9 item part no. Part description qty. 1 250-9593 right 250-34 door 1 2 5-130 door latch 1 3 5-122 hinge 8" ss 1 4 h-74419 cb 1/4"- 20 x .75" ss 4 5 h-70860 nylok 1/4"- 20 ss 8 6 21-1126 roller bracket 1 7 21-1127 roller 1 8 h-11319 hb 5/8"- 11 x 4" 1 9 h-37038 jnyl 5/8"- 11...

  • Page 105: Left 250-34 Door

    2 1 item part no. Part description qty. 1 250-9592 left 250-34 door 1 2 5-130 door latch 1 3 5-122 hinge 8" ss 1 4 h-74419 cb 1/4"- 20 x .75" ss 4 5 h-70860 nylok 1/4"- 20 ss 8 6 21-1126 roller bracket 1 7 21-1127 roller 1 8 h-11319 hb 5/8"- 11 x 4" 1 9 h-37038 jnyl 5/8"- 11 1 10 h-71013 fw 1/4" x 5...

  • Page 106: Doors And Bumper

    Doors and bumper 4 4 4 4 7 5 6 1 1 1 1 4 4 4 4 page # 104 2 2 3 3 3 3 2 2 note: sub # 555 right 250-34 door shown for 250-30 door use sub # 553 right 250-30 door note: sub # 554 left 250-34 door shown for 250-30 door use sub # 552 left 250-30 door.

  • Page 107: Doors And Bumper

    Doors and bumper item part no. Part description qty. 1 h-70860 nylok 1/4"- 20 ss 8 2 h-74430 cb 5/16"- 18 x 1" ss 4 3 h-70861 nylok 5/16" - 18 ss 4 4 h-70003 hcs 1/4"- 20 x 3/4" ss 8 5 250-1105 250 rear bumper 1 6 555 sub #555 right 250-34 door 1 7 554 sub #554 left 250-34 door 1 page # 105.

  • Page 108

    Cylindrical deck 15 28 21 27 29 8 33 25 2 18 4 12 3 1 33 34 35 44 36 39 30 26 38 37 32 6 5 24" hopper use part # 253-9050 27" hopper use part # 253-9051 30" hopper use part # 253-9052 34" hopper use part # 253-9053 24" deck use part # 253-9000 27" deck use part # 253-9027 30" deck use part # 253-903...

  • Page 109

    Item part no. Part description qty. 1 253-9000 cylindrical brushhead, 24" 1 2 253-9002 motor adj bracket 2 3 253-8225 timing sprocket 68 tooth 2 4 253-8215 timing sprocket 32 tooth 2 5 1-305 bearing housing 4 6 253-8240 drive bearing 2 7 253-0837 broom driver 2 8 250-222 motor, 36v, 3/4 hp, 350 rpm ...

  • Page 110: Cylindrical Wipers

    Cylindrical wipers 10 10 11 14 7 2 12 16 1 3 5 6 8 9 15 17 page # 108 for left hand wiper use part # 250-1232 part number 250-1235l linatex part number 250-1235g gum rubber part number 250-1235u urethane.

  • Page 111: Cylindrical Wipers

    Item part no. Part description qty. 1 250-1230 shroud hinge 1 2 290-1245 3/8" id, 1/2" od, 3/8" lg, flange bearing 4 3 250-1231 rh shroud horizontal arm 1 5 250-1233 shroud vertical arm 2 6 250-1234 shroud side 1 7 290-1233 3/8" id, 1/2" od, 1/4" lg bearing 2 8 250-1235 shroud curtain 1 9 250-1236 w...

  • Page 112

    Right cylindrical doors item part no. Part description qty. 1 250-9594 door (rh 27" cylindrical) 1 2 5-122 8" ss hinge 1 3 21-1127 roller 4 4 5-130 door latch 1 5 h-70001 hcs 1/4"-20 x 1/2 ss" 4 6 h-nj04c jnyl 1/4" - 20 ss 4 7 h-13337 hb 5/8"- 11 x 13" 1 8 h-37038 jnyl 5/8"- 11 1 page # 110 3 8 6 2 ...

  • Page 113

    Item part no. Part description qty. 1 250-9595 door (lh 27" cylindrical) 1 2 5-122 8" ss hinge 1 3 21-1127 roller 4 4 5-130 door latch 1 5 h-70001 hcs 1/4"-20 x 1/2 ss" 4 6 h-nj04c jnyl 1/4" - 20 ss 4 7 h-13337 hb 5/8"- 11 x 13" 1 8 h-37038 jnyl 5/8"- 11 1 left cylindrical doors page # 111 6 7 1 4 8...

  • Page 114: Page 112

    250 side brooms 7 14 9 6 8 13 11 12 3 4 15 2 1 5 10 5 10 6 8 6 page 112.

  • Page 115: Page 113

    250 side brooms item part no. Part description qty. 1 290-4630 axle support bracket 2 2 290-4620 side broom suspension axle shaft 1 3 250-4420 side broom lift arm (lh) 1 4 250-4421 side broom lift arm (rh) 1 5 4-446 grommet-3/8 id x 1-1/2 od x .375 4 6 h-78015 fw 5/16" x 3/4" ss 6 7 h-70065 hcs 5/16...