R.P.S. Corporation 290 Series Operating Instructions & Parts Manual - page 25
25
290/350 Operator and Parts Manual V13.1210
STANDARD WARRANTY POLICY (RPS Corporation)
RPS Corporation warrants its machines, parts and accessories to be free of manufacturer’s defects
for the periods specified below. Warranty will be granted at the sole discretion of RPS Corporation and
is subject to final claim and parts review by R.P.S. Corporation and its vendors. This policy is effective
January 1, 2013 and is subject to change on production units at a future date.
COVERAGE, EXCLUSIONS AND LIMITATIONS:
Coverage:
All Models sold (Except Floor Machines: 1 Year Parts / 6 Months Labor / No Travel)
Parts:
36 months / 1,500 hours on “Power On” hour meter
Labor:
12 months
Travel:
3 months (150 mile maximum)
Poly Tanks: 7 Years (Water must not exceed 135°F/57°C) / 3,000 Hours
OEM Parts: 90 Day New Part Warranty
Validity:
Fully completed Machine Delivery Form (online or fax) is on record at RPS and machine
is serviced by Factory Authorized Personnel.
Limitation: Warranty will begin on date of machine installation to end-user or 6 months after ship-
ment from RPS Corp. to the distributor if unsold at that time.
This warranty includes all parts on the machine except normal wear parts. Some of these exceptions
are:
• EDGE / ORBITZ isolators (250 hours on average)
• Squeegee Blades, Wiper Blades, Skirts and Curtains.
• Caster Wheels, Squeegee Wheels and Bumpers.
• Lights (Strobe, Headlights, or Bulbs).
• Chains and Belts.
• Filters, Screens, and Vacuum Bags.
• Motor Brushes and commutater wear.
• Brooms, Brushes, Pads and Pad Retainers.
• Hoses and Tubing.
• Drive Tires, Pneumatic Wheels and Tubes.
• Rubber Floor Seals and Gaskets.
• Vacuum motors with evidence of moisture or debris intrusion or > 400 hours.
• The Batteries (see below).
•
NOT COVERED: Routine maintenance, adjustments or parts damaged from abuse, neglect,
improper use of the machine, or lack of scheduled “daily, weekly, monthly” maintenance in ac-
cordance with our published PM Sheets.
POLY TANKS: 7 Years Coverage against leakage due to manufacturer’s defect in materials or work-
manship. Tank warranty void if water used exceeds 135°F/57°C
NOTE: Freight coverage for 3 Years under the parts section of warranty.
BATTERIES: Warranted through battery manufacturer for One (1) Year (pro-rated) from the date of
delivery. The battery manufacturer approves or denies the warranty coverage after analysis. We rely on
solely on their review.
NOTE NOT COVERED: Damage from lack of water, failure to use OEM charger, or non-distilled water.
Battery terminals – Battery terminals and cable connections are covered for 30 days from the shipment
of the machine. (Battery terminals tightness should be inspected every 30 days.)