R&S 1331.6539.85 Manual - 4.3

Manual is about: External Preamplifier

Page of 12

Download

Print this page

Bookmark us

Retrieving the S-Parameters

R&S

HA-Z24E

Manual 1178.6140.02 ─ 02

3. On the PC, start the HA_Z24E-1.06.msi file to install the driver.

In case the Windows user account does not have sufficient rights:

a) Search for the command-line tool CMD.

b) Right-click the tool and select the "Run as Administrator" option.

c) Start the HA_Z24E-1.06.msi file from there.

4.3

Connecting the R&S

HA-Z24E to a PC

Do not connect multiple R&S

HA-Z24E preamplifiers to the same PC at the

same time.

► Connect the USB connector of the R&S

HA-Z24E to the two USB ports of the

PC using the provided y-shaped USB cable. If you connect the R&S

HA-Z24E

to only one USB port, it does not work.

A green LED indicates the correct connection to the USB ports. If the LED is

not on, check the connection.

Via the USB connection, the PC provides power to the R&S

HA-Z24E, and

transfers data from the preamplifier to the PC.

As soon as you connect the R&S

HA-Z24E to a power supply, the preamplifier

is permanently on. It is ready to use after its warmup time, see the data sheet

for details.

4.4 Starting the Software

Ensure the prerequisites and the connection described above are carried out

before starting the software.

► On the PC, run the HA-Z24E-Tool.exe included with the driver from any

directory.

Starting the Software

« ‹ Prev 5 6 7 8 9 10 11 Next › »

Summary of 1331.6539.85

Page 1
R&s ® ha-z24e external preamplifier manual manual 1178.6140.02 ─ 02 (;ÜËx2).
Page 2
This manual describes the following r&s ® ha-z24e model: ● 1331.6539.85 © 2017 rohde & schwarz gmbh & co. Kg mühldorfstr. 15, 81671 münchen, germany phone: +49 89 41 29 - 0 fax: +49 89 41 29 12 164 email: info@rohde-schwarz.Com internet: www.Rohde-schwarz.Com subject to change – data without toleran...
Page 3
Contents r&s ® ha-z24e 3 manual 1178.6140.02 ─ 02 contents 1 about the r&s ha-z24e....................................................... 3 2 for your safety...................................................................... 4 3 product description....................................................
Page 4
For your safety r&s ® ha-z24e 4 manual 1178.6140.02 ─ 02 2 for your safety the r&s ha-z24e is designated for use in industrial, administrative, and labora- tory environments. Use the r&s ha-z24e only for its designated purpose. Observe the safety and usage instructions in this manual and the supplie...
Page 5
Product description r&s ® ha-z24e 5 manual 1178.6140.02 ─ 02 the preamplifier unit consists of the following main parts: figure 3-2: main parts of the preamplifier unit 1 = rf input connector 2 = rf output connector 3 = lemosa 5-pole usb connector and status led for power supply 4 = adjustable feet ...
Page 6
Product description r&s ® ha-z24e 6 manual 1178.6140.02 ─ 02 possible damage to measurement device due to excess power to avoid damage to your measurement device, ensure that it supports the maximum output power of the r&s ha-z24e of +18 dbm. Direct connection cable connection lemosa 5-pole usb conn...
Page 7: 4.1
Retrieving the s-parameters r&s ® ha-z24e 7 manual 1178.6140.02 ─ 02 4 retrieving the s-parameters the r&s ha-z24e stores the s-parameters as a touchstone (.S2p) file on the device. You can read out those values from a connected pc. 4.1 prerequisites to read out values from the r&s ha-z24e, the pc m...
Page 8: 4.3
Retrieving the s-parameters r&s ® ha-z24e 8 manual 1178.6140.02 ─ 02 3. On the pc, start the ha_z24e-1.06.Msi file to install the driver. In case the windows user account does not have sufficient rights: a) search for the command-line tool cmd. B) right-click the tool and select the "run as administ...
Page 9
Measurement setup with r&s ha-z24e r&s ® ha-z24e 9 manual 1178.6140.02 ─ 02 the software uses the installed driver and reads out the touchdown (.S2p) file from the eeprom of the r&s ha-z24e. The file is stored on the pc, in the same directory the software was started from. The name of the file is ha...
Page 10
Measurement setup with r&s ha-z24e r&s ® ha-z24e 10 manual 1178.6140.02 ─ 02 precautions to avoid damage to the rf connectors when setting up a measurement with the r&s ha-z24e, consider the fol- lowing to avoid damage to the rf connectors: ● use the cables provided with the r&s ha-z24e to connect t...
Page 11
Performance test r&s ® ha-z24e 11 manual 1178.6140.02 ─ 02 a) connect one end of the 1-mm cable to the rf out connector of the r&s ha-z24e. B) connect the other end of the 1-mm cable to the rf input connector of the measurement device. 4. Connect the usb power supply connector of the r&s ha-z24e to ...
Page 12
Performance test r&s ® ha-z24e 12 manual 1178.6140.02 ─ 02 evaluation the measured s-parameter s21 should comply with the datasheet specification for small signal gain..